stock bottom end f1-c
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: china grove, nc
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
stock bottom end f1-c
I am finishing putting together a stock bottom end ls1 with victor junior intake 90 mm tb, 224/228 114 cam. manley springs, kooks headers f1-c procharger, turbo 400. i am probally forgetting some thing. what kind of power do you think it will make and how long will it last, oh yeah meth inj. going to run 93 octane
#6
On The Tree
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: china grove, nc
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
it is a 5 inch pulley , i know it will not last long, i am building a 434 lsx block engine next year, for now i want to see what it will do , for a short while haha
#7
TECH Fanatic
iTrader: (6)
I hope it's not your daily. If it is your probably going to blow it when you least expect it and can't afford it. If it's not your daily it will probably live just fine until you get the new motor built. Gotta love Murphy...
Edit: What's the difference and advantage of going F-1C over the F-1A? I was thinking of doing the F-1A on my car, but I'm curious about the F-1C.
Edit: What's the difference and advantage of going F-1C over the F-1A? I was thinking of doing the F-1A on my car, but I'm curious about the F-1C.
Trending Topics
#15
Teching In
iTrader: (1)
Join Date: Nov 2008
Location: The Woodlands, TX
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
I have a D1SC at 9psi and put down 653rwhp/546rwtq and its a stock block and heads. Stock internals except the cam. I drive it 4000 miles a month and it has 53000 miles on it. No probs yet. It's getting meth this summer and should be around 720rwhp
#16
LS1Tech Sponsor
iTrader: (12)
But the person posting is running a T400 which will put alot more stress on the motor/blower combo which would lead to failure alot quicker.I highly doubt the 5" pulley will strain the motor,so with a good tune it will last a real long time.The downfall is the blower will be way under it's efficiency for now.
#17
TECH Regular
iTrader: (24)
Join Date: Aug 2007
Location: Billings, Montana
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Who agreed to tune that big of a head unit on a stock bottom end? Lol. The meth is going to buy you time but I don't give it six months. I hope I'm proven wrong but I remember seeing a Corvette owner in Europe who ran an F1-A on a stock motor with comparable octane (XX Ron) blow his engine up. He even ran D1SC pulley's I believe to run lower boost.
I would just drive the engine without the kit installed until you have a built motor for it.
I would just drive the engine without the kit installed until you have a built motor for it.
#19
TECH Fanatic
iTrader: (1)
Join Date: Nov 2007
Location: NJ
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
I run a 4.75 blower pullley and 8 inch crank. With a f1c my stock ls2 bottom end is holding up fine but I do. Run it on the a/f rich side . With a lot of meth injection. Being beating the crap out of it for over a year now. Don't worry put the kit on and save for a rebuild cause it will need it. But not right away if the engine is good.
#20
On The Tree
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: china grove, nc
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
I do have a meth kit going on it. ordered 5" pulley today. still waiting on a few parts. going to mount the supercharger this weekend hopefully. i will try to get some pict of the car this weekend. it looks pretty good. but that does not help the motor last any longer lol. oh well it should last a little while with a safe tune.