Newb on heads cam
06-21-2009, 03:34 PM
#1
Teching In
Thread Starter
Join Date: Sep 2007
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Newb on heads cam I was looking at the heads cam package which consisted of TorquerV3 cam and PRC stage 2.5 ls6 heads can anyone tell me how good this setup is on the street? My car is not a dd and its a m6.
06-21-2009, 06:21 PM
#2
TECH Enthusiast
iTrader: (4)
Join Date: Sep 2003
Location: Rogers, Ark.
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Misc. links for reference:
https://ls1tech.com/forums/dynamomet...3-90-90-a.html
https://ls1tech.com/forums/dynamomet...uer-v-3-a.html
https://ls1tech.com/forums/generatio...uer-v-3-a.html
Last edited by John02Hawk; 06-21-2009 at 06:33 PM.
06-21-2009, 06:43 PM
#4
TECH Enthusiast
iTrader: (4)
Join Date: Sep 2003
Location: Rogers, Ark.
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
2300-6700 RPM Power Band with a peak around 6400rpm; This is an excellent performance camshaft with a rough idle!
Even with an awesome tuner, you will lose drivability at low RPMs. EX: Cruise control at 75MPH in 6th gear..
With your car not being a DD, I wouldn't worry too much about it..
Read this: https://ls1tech.com/forums/generatio...-v2-vs-v3.html
