I8AFORD

iTrader: (4)

look N sig for details...on car

LS3 415 CAM ONLY..LG G6X3,, STOCK Heads...plus bolt ons...full exhaust with Mufflers...3.90 gear wtih 28s...I think it needs some 4.56..or 4.30 at least

I need an updated M6..I cant power shift...wont go N gear..so times R with granny shift mode...car has alot left N it

N/A....NEW BEST
1.52 60ft
4.37 330ft
6.69 1/8
105.27 1/8 mph
8.78 1000ft
10.512 1/4
131.10 mph

150 SHOT
1.52 60ft
4.29 330
6.48 1/8
108.99 mph
8.41 1000 ft
10.00 1/4 RRRRR
139.75 mph

175 shot
NEW BEST...1/4....not posting ET
109.36 1/8 MPH
140.99 1/4MPH

I NEED A GOOD T56 and this car will fly

80 degress...and humid dont know the DA..ran at ORP

Thanks LOUIS for the good Running CAR.....

Z-RATED94

iTrader: (6)

Why not post your et for the last run? With all the other info it's pretty easy to figure it out.

Nine Finger 02 Z28

iTrader: (11)

Looks like a low 9.90 or high 9.80...

Louis

iTrader: (7)

Dang! Did they kick you out, or warning for the 10.DOH? Its legal to that.... and I know they are strict!

Good work! I guess we need to add a trans to the winter mod list?

Pro Stock John

iTrader: (34)

Very nice Jason, thanks for sharing. What compression is your engine?

6point7s14

iTrader: (3)

Very nice times. How much your car weigh?

FAST FREDDY

were you spraying the nitrous out of the hole off the line in 1st gear or were you spraying after the sixty foot mark in 2nd gear?

Louis

iTrader: (7)

PSJ, its about 11.5:1. Pump gas car. Nothing exotic Just a good driver

ndfrsd6

iTrader: (5)

great runs but like asked why hide your time

Pro Stock John

iTrader: (34)

Not sure why he would hide the ET unless it was very good or not impressive... either way it's somewhere between a 9.75 and a 10.3 hehe who cares we are not stupid Jason.

I8AFORD

iTrader: (4)

thanks for kind word guys

NOt try to hide ET to the techies ,,LOL some locals read this time to time ..I like to keep them wondering..WE may do a money race...

Ill have a video up n a week I hope of the 140 mph...pass

Back to work ..I'll answer some of these other questions tonight

z28rob18

iTrader: (7)

nice times. wat rpm do you shift it at?

chrs1313

iTrader: (24)

i will race you heads up but not till next year after i get the heads and bottle

I8AFORD

iTrader: (4)

Sounds fun!!!!!!!!!!!
Should have new M6 ,Heads,102mm FAST,and 200 shot by then

I8AFORD

iTrader: (4)

Race weight ...I dont know..Im 170 lbs..IRON BLOCK..hardtop,leather,cage,welds,MW 9in,full 3in exhusast..prolly 3400lbs...2/3 tank of gas also

didnt get kicked out,,,lap belt,,tennis shoes,jeans,t-shirt

shift pionts...dont know...no shift light or aftermarket tac,,,no time to look at stock one and im sure its not acurate...i just drive the car...its very consistinet

I spray it out of the hole N 1st gear...

the car nose dives on shift,,1-2 is bad just to get it to go n gear..maybe I need a TICK Master....im sure im loseing 2-3ths there..plus 60ft isnt great....HALS r set at 3 n front 5 n rear....28x10 et drag..10 psi..maybe wheel spining on rim also..ALot left n this combo...U can hear 3rd gear rubber n the Video...

2nd gear burn out..NO LINE LOCK

hope this helps...

1BADAIR

iTrader: (1)

how is a 415 cam only?

gold98Z28

iTrader: (7)

car is flying on the motor, not too impressive on the jug, but im sure thats due to overpowering a non shifting T56....

I8AFORD

iTrader: (4)

hows a 346 CAM ONLY.?

sorry.... 415 with stock UNTOUCHED heads....and all bolt ons...stock LS3intake..NW 90mm TB

JFM-jr

iTrader: (23)

If i'm not mistaken those heads flow 320 CFM untouched. Gotta love the LG camshafts car is making great power.

I8AFORD

iTrader: (4)

I belive u R correct they r very good heads...

Im not trying to class the car as cam only...just meant that it didnt have aftermarket or PORTED heads on a 415 is all

YES LG puts some very good cams on the market...this is the 3rd cam I have had from them,,and 3rd car I have had them buuild...everyone performed well