PRC 5.3 stg 2.5's and Streetsweeper HT questions
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Durant, Ok.
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
PRC 5.3 stg 2.5's and Streetsweeper HT questions
I just bought a set of PRC 5.3's and I was wanting to upgrade the cam too. After looking through several builds it seems that everyone is happy with their Streetsweeper HT cam. My questions is, how will that cam perform with those heads?
I am currently cam only, and I have a Performabuilt 3500 stall, 3.42 gears. I also have 3" true duals too.
I am currently cam only, and I have a Performabuilt 3500 stall, 3.42 gears. I also have 3" true duals too.
#4
9 Second Club
iTrader: (10)
Here is a cam only LS6 http://www.hardcorels1.com/vbulletin...ead.php?t=3546
Results seem very impressive with this cam and I am sure it picks up everywhere. With even better heads than stock 243's I'm sure it will run hard with great street manners.
Results seem very impressive with this cam and I am sure it picks up everywhere. With even better heads than stock 243's I'm sure it will run hard with great street manners.
#5
TECH Apprentice
Join Date: Jan 2007
Location: Hudson florida
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Im sure it will run excellent with those heads. I have the vrx4 cam and put down 394 hp with an ls7 clutch but its through a 6sp. Ill bet that thing would ride the hell out.
Trending Topics
#8
TECH Senior Member
I just bought a set of PRC 5.3's and I was wanting to upgrade the cam too. After looking through several builds it seems that everyone is happy with their Streetsweeper HT cam. My questions is, how will that cam perform with those heads?
I am currently cam only, and I have a Performabuilt 3500 stall, 3.42 gears. I also have 3" true duals too.
I am currently cam only, and I have a Performabuilt 3500 stall, 3.42 gears. I also have 3" true duals too.