Got my 8.8 Housing Finished Today
#1
11 Second Club
Thread Starter
iTrader: (45)
Join Date: Aug 2006
Location: PORT ST LUCIE FL
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Got my 8.8 Housing Finished Today
just thought I would post a few pic's of my weekend project, im doing a 8.8 ford swap in my 02 camaro SS. heres a pic of the axle tube's welded to the ford housing.
Uploaded with ImageShack.us
sorry about the crappy cell phone pic's
Here it is painted with the upper control arm ear's cut off.
Uploaded with ImageShack.us
I'm doing the mini four link setup and diching the torque are, we could have gotten it in today but it started to rain just as the paint was dry, not to bad for a day and a half's work. I will post more pic's when it goes in the car, sould be tomorrow.
Uploaded with ImageShack.us
sorry about the crappy cell phone pic's
Here it is painted with the upper control arm ear's cut off.
Uploaded with ImageShack.us
I'm doing the mini four link setup and diching the torque are, we could have gotten it in today but it started to rain just as the paint was dry, not to bad for a day and a half's work. I will post more pic's when it goes in the car, sould be tomorrow.
#6
TECH Junkie
iTrader: (31)
I was not even thinking of that
Mine is in the finishing steps of the 8.8 conversion. I gave into the Explorer rear end since it had 31-spline axles and locker. the pain in that is the pinion is moved over to the passenger side about 2" I may just head back to the bone yard and get a mustang 8.8 and swap the guts
Mine is in the finishing steps of the 8.8 conversion. I gave into the Explorer rear end since it had 31-spline axles and locker. the pain in that is the pinion is moved over to the passenger side about 2" I may just head back to the bone yard and get a mustang 8.8 and swap the guts
Trending Topics
#8
11 Second Club
Thread Starter
iTrader: (45)
Join Date: Aug 2006
Location: PORT ST LUCIE FL
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
in car pic's
Uploaded with ImageShack.us
Uploaded with ImageShack.us
We got it in the night before last, i am completly floored with the results, you would never know the torque arm was gone. and before anyone messages me i did fix the bolt and i was adjusting the uppers when this picture was taken and the sway bar will be back on tonite.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
We got it in the night before last, i am completly floored with the results, you would never know the torque arm was gone. and before anyone messages me i did fix the bolt and i was adjusting the uppers when this picture was taken and the sway bar will be back on tonite.