valve drop on TEA heads
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Mar 2004
Location: Indy
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
valve drop on TEA heads
I had a machine shop measure valve drop on my TEA 5.3 Stage 1.5 heads (62cc) and he came up with .109 on the intake, and .177 on the exhaust. Seems really short on the intake. Can this be correct?
#2
TECH Enthusiast
iTrader: (6)
Join Date: Sep 2007
Location: Mo
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/generatio...ve-flycut.html
#3
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Mar 2004
Location: Indy
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
I noticed the cam in your sig you may want to read this thread.
https://ls1tech.com/forums/generatio...ve-flycut.html
https://ls1tech.com/forums/generatio...ve-flycut.html
#7
LS1Tech Premium Sponsor
iTrader: (4)
That seems really low. I'd check it again. Stock is 165/185 if memory serves me correctly.
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com