anyone tried this cam?
#1
Staging Lane
Thread Starter
Join Date: Nov 2010
Location: Seymour,Indiana
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
anyone tried this cam?
I have a 2005 a4 gto and am planning on installing this cam comp cam #54-456-11 duration at.50 219/227 lift .607/.614. What does everyone think?
#2
TECH Enthusiast
#6
I'm going to give that a try in a stock bottom end LS1 with 243 heads...but I'm using 26918 beehives. Yea...I know...but I am not the first to use these springs with this cam. They work well with it. If I go to the light valves, I'm really golden.
#7
12 Second Club
iTrader: (4)
Ive used that cam with the new 918s on probably 4-5 engines now. Great all round cam!!.
It made 46hp on the 5.3L I out it in last time on the engine dyno(Used 26926s here customers preference).
Ive also used it on 6.0Ls and with a decent set of heads they always make 490-515hp.
I also personally run almost the same cam in my personal vehicle. Except I picked the one with the larger exhaust for my LS3 heads (219/235) and I run 918s.
It made 46hp on the 5.3L I out it in last time on the engine dyno(Used 26926s here customers preference).
Ive also used it on 6.0Ls and with a decent set of heads they always make 490-515hp.
I also personally run almost the same cam in my personal vehicle. Except I picked the one with the larger exhaust for my LS3 heads (219/235) and I run 918s.
Trending Topics
#8
Ive used that cam with the new 918s on probably 4-5 engines now. Great all round cam!!.
It made 46hp on the 5.3L I out it in last time on the engine dyno(Used 26926s here customers preference).
Ive also used it on 6.0Ls and with a decent set of heads they always make 490-515hp.
I also personally run almost the same cam in my personal vehicle. Except I picked the one with the larger exhaust for my LS3 heads (219/235) and I run 918s.
It made 46hp on the 5.3L I out it in last time on the engine dyno(Used 26926s here customers preference).
Ive also used it on 6.0Ls and with a decent set of heads they always make 490-515hp.
I also personally run almost the same cam in my personal vehicle. Except I picked the one with the larger exhaust for my LS3 heads (219/235) and I run 918s.
#13
JustAnotherLS2...I would love to hear them. This cam appears to be one that takes huge advantage of the cathedral port design and has a very broad torque range. For street performance and manners, this appears to be very good. But I'm ALWAYS open to new ideas!!
#14
By any chance does anyone on here have sound clips of this cam? I just purchased one and i would like to hear it. Please help
Ive used that cam with the new 918s on probably 4-5 engines now. Great all round cam!!.
It made 46hp on the 5.3L I out it in last time on the engine dyno(Used 26926s here customers preference).
Ive also used it on 6.0Ls and with a decent set of heads they always make 490-515hp.
I also personally run almost the same cam in my personal vehicle. Except I picked the one with the larger exhaust for my LS3 heads (219/235) and I run 918s.
It made 46hp on the 5.3L I out it in last time on the engine dyno(Used 26926s here customers preference).
Ive also used it on 6.0Ls and with a decent set of heads they always make 490-515hp.
I also personally run almost the same cam in my personal vehicle. Except I picked the one with the larger exhaust for my LS3 heads (219/235) and I run 918s.