Dyno Results and Video - 847rwhp
#1
11 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Results and Video - 847rwhp
Here is a video of the final results. I'll post up another video when I have time to edit all the videos we took.
Pump Gas tune by Steve " Tuned By Frost "
15lbs. of boost
Sucks dyno wouldn't give us a torque number over 5500 rpm but at 5400 rpm it was over 638 torque
Here is the build thread for all the details
https://ls1tech.com/forums/forced-in...ld-thread.html
2000 WS6 F1A Build thread!!!
Link to video
http://www.flickr.com/photos/nasty_n...ce/5843697436/
Big thanks to all involved in the build.
Steve " Tuned by Frost "
Bryan at LME for the short block
Al Keller at LPE for the Head port work
Joe Haine's "JPH" Motor Final assembly
Bill Davis for the custom charge pipes
Tim Kiefer for the awesome paint work
Chris "aster" for the blower bracket
Pump Gas tune by Steve " Tuned By Frost "
15lbs. of boost
Sucks dyno wouldn't give us a torque number over 5500 rpm but at 5400 rpm it was over 638 torque
Here is the build thread for all the details
https://ls1tech.com/forums/forced-in...ld-thread.html
2000 WS6 F1A Build thread!!!
Link to video
http://www.flickr.com/photos/nasty_n...ce/5843697436/
Big thanks to all involved in the build.
Steve " Tuned by Frost "
Bryan at LME for the short block
Al Keller at LPE for the Head port work
Joe Haine's "JPH" Motor Final assembly
Bill Davis for the custom charge pipes
Tim Kiefer for the awesome paint work
Chris "aster" for the blower bracket
Last edited by NASTYTRANSAM; 06-18-2011 at 10:57 PM.
Trending Topics
#15
Launching!
Join Date: Mar 2009
Location: Melbourne, Australia
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
#18
TECH Resident
iTrader: (9)
Join Date: Feb 2005
Location: Fort Wayne, IN
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
They are due out like 25th of july from what I have been told. I still dont know what I want for rear wheels yet, so I am going to try the 19" DR see how that works out, should be better than the Invos.