Rebuilding an Eaton Truetrac
#3
It's in the car at the moment..plans are to yank it out tomorrow and put a stock LS1 Torsen in it since the Eaton one is trashed.
Here it is on the Eaton website.
http://www.eaton.com/Eaton/ProductsS...als/PCT_223847
Here it is on the Eaton website.
http://www.eaton.com/Eaton/ProductsS...als/PCT_223847
#7
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 79 Likes
on
70 Posts
Right, but I kinda felt like they make it out to be better then what it is. Well anyway, take some pics, I have wanted to dive inside one of these for a while just haven't taken the plunge yet.
Trending Topics
#11
Well here it is..
Everything looks normal..the problem with it is that it backlashed like a mother ****** taking off..gears in the car were fine and at .008 backlash, nothing else is wrong. A stock Torsen was installed in the car and it drives fine.
I'm baffled..
I'm going to look at it more closely, clean it up, reassemble it, and install it in my S10.
Everything looks normal..the problem with it is that it backlashed like a mother ****** taking off..gears in the car were fine and at .008 backlash, nothing else is wrong. A stock Torsen was installed in the car and it drives fine.
I'm baffled..
I'm going to look at it more closely, clean it up, reassemble it, and install it in my S10.
Last edited by the_merv; 08-31-2011 at 02:45 AM.