Rebuilding an Eaton Truetrac
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's in the car at the moment..plans are to yank it out tomorrow and put a stock LS1 Torsen in it since the Eaton one is trashed.
Here it is on the Eaton website.
http://www.eaton.com/Eaton/ProductsS...als/PCT_223847
Here it is on the Eaton website.
http://www.eaton.com/Eaton/ProductsS...als/PCT_223847
#7
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 81 Likes
on
72 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Right, but I kinda felt like they make it out to be better then what it is. Well anyway, take some pics, I have wanted to dive inside one of these for a while just haven't taken the plunge yet.
Trending Topics
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well here it is..
![](http://i103.photobucket.com/albums/m129/the_merv/S10/1df3b957.jpg)
Everything looks normal..the problem with it is that it backlashed like a mother ****** taking off..gears in the car were fine and at .008 backlash, nothing else is wrong. A stock Torsen was installed in the car and it drives fine.
I'm baffled..![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
I'm going to look at it more closely, clean it up, reassemble it, and install it in my S10.
![](http://i103.photobucket.com/albums/m129/the_merv/S10/1df3b957.jpg)
Everything looks normal..the problem with it is that it backlashed like a mother ****** taking off..gears in the car were fine and at .008 backlash, nothing else is wrong. A stock Torsen was installed in the car and it drives fine.
I'm baffled..
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
I'm going to look at it more closely, clean it up, reassemble it, and install it in my S10.
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
Last edited by the_merv; 08-31-2011 at 02:45 AM.