5.3 with BW475?
#1
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
5.3 with BW475?
Would a BW475 a.r 1.10 T6 turbo be a niice set up for my build
02 Stock bottom LM7 5.3- ls6 cam- stock heads- victor jr intake manifold- 6061 elbow- stock TB- meth injection- front mount- 4l80e - looking to boost 15psi and close to 600hp on pump gas... if you have pics or dynos or times please post
02 Stock bottom LM7 5.3- ls6 cam- stock heads- victor jr intake manifold- 6061 elbow- stock TB- meth injection- front mount- 4l80e - looking to boost 15psi and close to 600hp on pump gas... if you have pics or dynos or times please post
Last edited by 831jd; 12-24-2011 at 04:12 PM.
#2
TECH Regular
iTrader: (2)
Join Date: Oct 2010
Location: Denver, CO.
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
Would a BW475 a.r 1.10 T6 turbo be a niice set up for my build
02 Stock bottom LM7 5.3- ls6 cam- stock heads- victor jr intake manifold- 6061 elbow- stock TB- meth injection- front mount- 4l80e - looking to boost 15psi and close to 600hp or more on pump gas... if you have pics or dynos or times please post
02 Stock bottom LM7 5.3- ls6 cam- stock heads- victor jr intake manifold- 6061 elbow- stock TB- meth injection- front mount- 4l80e - looking to boost 15psi and close to 600hp or more on pump gas... if you have pics or dynos or times please post
Here's one just a few posts down.
https://ls1tech.com/forums/forced-in...-pictures.html
Here's another one on the third page.
https://ls1tech.com/forums/forced-in...lots-pics.html
Here's another.
https://ls1tech.com/forums/multimedi...dyno-runs.html
Just search man
Last edited by SATAN; 12-24-2011 at 04:11 PM.
#4
TECH Regular
iTrader: (2)
Join Date: Oct 2010
Location: Denver, CO.
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
I just posted a dyno of one. It took me less than 3 minutes to find using the search button. Stop being lazy and expecting everyone to spoon feed you. Nevermind, the vid has been deleted. But the point still remains very valid. The info is out there, you have to find it.
Trending Topics
#8
TECH Enthusiast
iTrader: (19)
I agree about searching, almost every setup that one can think of has already been done, and searching can find it. However, I will offer up my personal experience with this turbo/ engine combo from a few years back:
https://ls1tech.com/forums/forced-in...nning-now.html
I never had it dyno'd but I ran it once at the track and it went 132mph in the 1/4 on 10# boost. It still had the original open rearend so the short time and ET weren't there. The car weighed 3140 with me in it so you can do the math on the power it had at 10# of boost.
https://ls1tech.com/forums/forced-in...nning-now.html
I never had it dyno'd but I ran it once at the track and it went 132mph in the 1/4 on 10# boost. It still had the original open rearend so the short time and ET weren't there. The car weighed 3140 with me in it so you can do the math on the power it had at 10# of boost.