Now With Stainless Works
#1
Now With Stainless Works
Hello fellow gear heads this is George R formally of Kooks. I am now with Stainless works. We have all your Ls1 exhaust needs covered. If I can be any assistance to anyone out there please feel free to call me here at 1-800-878-3635 ask for George. See you at the races.
#3
Can you please snag the blueprints from the former GMMG and start replicating that catback? pretty please? I'm worried something will happen to mine and then I'll be SOL. I love my exhaust.
#7
The Scammer Hammer
iTrader: (49)
I researched it for a while. It was the price that kept it just out of arms reach.
My whole thing was I didn't want a cut-out, and with the 3.5" I-Pipe and 3" tailpipes I figured it would provide all the flow I need.
I had a GMMG about 4 years ago and LOVED the sound..... just hated the bends and the size.
Trending Topics
#8
TECH Fanatic
iTrader: (1)
I researched it for a while. It was the price that kept it just out of arms reach.
My whole thing was I didn't want a cut-out, and with the 3.5" I-Pipe and 3" tailpipes I figured it would provide all the flow I need.
I had a GMMG about 4 years ago and LOVED the sound..... just hated the bends and the size.
My whole thing was I didn't want a cut-out, and with the 3.5" I-Pipe and 3" tailpipes I figured it would provide all the flow I need.
I had a GMMG about 4 years ago and LOVED the sound..... just hated the bends and the size.
#10
TECH Senior Member
iTrader: (35)
Hey George, any plans for a 4" cat-back, or a 3.5" and/or 4" over axle tube "do-it-yourself" kit , or better yet a dual 2.5" or 3" over -axle-tube kit!
I know for the 3.5 or 4" you'd need a 60* bend right after, or at the end of the I-pipe, a 90* bend over the Axle tube, then another 90* bend to go to a muffler in the stock location.
Any plans for any of this, or 60* bends in the 3.5" and 4" size?
Thanks!
I know for the 3.5 or 4" you'd need a 60* bend right after, or at the end of the I-pipe, a 90* bend over the Axle tube, then another 90* bend to go to a muffler in the stock location.
Any plans for any of this, or 60* bends in the 3.5" and 4" size?
Thanks!
Last edited by 99Bluz28; 01-30-2012 at 11:17 PM.
#13
#16