bugy

im planning to use my LS1 intake into my 6.0L turbed setup, im wondering if it will work good with boost from turbo, it will be boosting something like 12 psi, what do you think, will intake work good with that boost? thanks

conan

iTrader: (5)

Good for what ? It will work just fine as far as its strength, It just doesn't flow as well as other intake manifolds.

NemeSS

iTrader: (127)

Its good enuff, but may need a bolt down plug like the ebay ones.
Not the auto parts rubber ones. I use metal 1 3/8 freeze plugs. But it may blow out.
It works fine for n/a or egr delete

bugy

well that was my bad for not mentioning good for what, will it take the boost? or it may break off or something!! about flow rate, which one flows better than this? cause i got this from my camaro if there are more considerably gains i could get it. thanks guys

conan

iTrader: (5)

If you can find a cheap ls6 intake that would be the best bang for the buck and you wouldn't have to deal with plugging the EGR hole (as nemeSS mentioned) on the ls1 intake. The ls6 also flows better than the ls1.

bugy

thank you guys, im looking for a LS6 intake then, in case i dont get it, will Ls1 intake be proper to handle those psi?

xxrillixx

iTrader: (118)

yes. ls1 will handle it, just wont flow as well.

ls1 1990 VN

Why don't you just do some research first....like, hit the search button.

bugy

thanks already found a cheap LS6 intake, im going with it!