01transampower

iTrader: (9)

So I am purchasing td's from a buddy of mine. He is going turbo on his caamero and no longer needs the td's. So i am purchasing them. However i want them to go out the back in stock location so i would like to see pictures and maybe cleareance demesions on an under the axel set up becuase i dont have the funds to do over the axel at this point. Anything would be a great help.

justin hover

TSPs under the axle..Clearence isn't bad at all.
http://pix.kg/p/276824046311%3A905051605/sct

01transampower

iTrader: (9)

That looks good. What else does everyone have?

01ssreda4

iTrader: (96)

I've made custom under the axle before. Clearance won't be good no matter how you do it. There just isn't much room to work with.

Blk98Vert

iTrader: (2)

Ckearance on my 3 inch setup was better than stock

justin hover

The X and header collector is lower than the pipes under my axle. The pop can pic is my lowest point. Which isn't bad at all clearence wise.

01transampower

iTrader: (9)

Well im just gonna be running 2.5". I bought a custom setup already. That dumps before the axel. Just have to do thd under axel part now with tips I made. My car is stock ride height and I never plan on lowering it. Plus weekend cruiser.

hiram007

iTrader: (19)

Since you don't plan on lowering, you can probably pull it off. Some dummy tips would do you much better and cheaper in case you changed your mind on lowering.

TankTheTurtle

here are my custom 2.5" tds under axle. I'm lowered 1" and still have great clearance.

The_Bishop

iTrader: (10)

If you're going under the axle, I'd fab in a way to disconnect the tailpipes after the mufflers, or if you ever need to drop the rear, you'll have to drop the entire exhaust as one piece.

01ssreda4

iTrader: (96)

^^^Words of wisdom

01transampower

iTrader: (9)

Yea I plan on having a 3 bolt flange welded on each side so I can do that. Ive seen and read a bunch on that and never thought about it till I saw it on here. I dropped the car off at the exhaust shop this morning. I cant wait to see it all done and hear how it sounds. Should be getting it this afternoon.

justin hover

^^^well????^^^

01transampower

iTrader: (9)

Well the exhaust shop I took it too tried to re-engineer my design so they ended up taking an extra day to do it. Unfortunately I left for vacation today so I had to have my dad pick it up for me. So next week ill be home and ill get pictures to you guys. Its now true duals x-pipe cats bullet mufflers and under the axel out the back.

01transampower

iTrader: (9)

How do we post pictures on here without it being a thumbnail or link?

01transampower

iTrader: (9)

The true duals under the axel is finally done!

01transampower

iTrader: (9)

The rest of the pictures!!!

brian_rs/ss

something's wrong with the sound on those pictures

01transampower

iTrader: (9)

Yea i will get a video tomorrow. My camera ran out of memory All the other pictures of the car filled it up haha

01transampower

iTrader: (9)

http://s1050.photobucket.com/albums/...t=P3272641.mp4