New FIC 120's and 839/687 on pump gas
#1
Staging Lane
Thread Starter
Join Date: Mar 2009
Location: NOVA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
New FIC 120's and 839/687 on pump gas
Just got the car back from Heintz Racing and it made 837/689 on pump and meth, 14 pounds pounds of boost, and through a DSS 9 inch IRS and some MT 345's. IDC is at 82% and I couldn't be happier with the injector characteristics. They tuned easy, idle nice down low, and I got about 18 mpg (hand calculated) cruising at 80 with the A/C running. Can't wait to see how they handle more boost and some Q16. Thanks for the injectors and support Jon.
Warhawk 427
Procharger F1c with a bicycle tire pulley (5.25") making 14 pounds barely spinning it.
Alky Control Meth kit
Worked over Beck sheet metal intake
FIC 120cc injectors
DSS 9 inch
CCW 18x12s with 345 DRs
Warhawk 427
Procharger F1c with a bicycle tire pulley (5.25") making 14 pounds barely spinning it.
Alky Control Meth kit
Worked over Beck sheet metal intake
FIC 120cc injectors
DSS 9 inch
CCW 18x12s with 345 DRs
#2
Closed ex-Sponsor Account
Join Date: Mar 2010
Location: Mooresville, NC
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for posting up Jeremy. This GTO is one of the nicest, and well built in the country. Tons of custom parts on this thing. Have fun with it!
Zach
Zach
#7
Staging Lane
Thread Starter
Join Date: Mar 2009
Location: NOVA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Sheet attached. You can see how swapping from the Ported 92 to the Beck picked things up. We'll see how ugly things get when we set it on kill.
I've got some old race tune sheets that are 9xx/8xx as well. Interested to see how far these climb with out that 92 holding me back and an injector that can handle oxygenated fuel.
I've got some old race tune sheets that are 9xx/8xx as well. Interested to see how far these climb with out that 92 holding me back and an injector that can handle oxygenated fuel.
Trending Topics
#12
Staging Lane
Thread Starter
Join Date: Mar 2009
Location: NOVA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
#13
TECH Addict
iTrader: (11)
looks dam good. wish i knew someone who could weld aluminum.... i tried finding those njectors but couldn't. any help? also, what intake is that? i like this setup. Im going to purchase an AES398 when they start building them in a few months so tryin to get all my stuff lined up. looks babass man
#15
Staging Lane
Thread Starter
Join Date: Mar 2009
Location: NOVA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
looks dam good. wish i knew someone who could weld aluminum.... i tried finding those njectors but couldn't. any help? also, what intake is that? i like this setup. Im going to purchase an AES398 when they start building them in a few months so tryin to get all my stuff lined up. looks babass man
http://www.facebook.com/pages/Bagsha...93067730720449