Heads + Cams? advice anyone?
#1
Launching!
Thread Starter
Join Date: Mar 2004
Location: Wauconda, IL
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Heads + Cams? advice anyone?
i'm looking at throwing some heads + cams in my 99 Z conv. i just wanted to research a little more and ask around people that actually have some what their opinions are. the only ones i've been looking at are the slp's. i deff. need to be able to pass emissions, want to keep all my stock AIR and EGR, but want to get the most power i can. also, will be a daily driver, but i'm not worried bout payin for gas, just want something relaible and that will last. any advice on products, what you'd recommend, what to avoid, etc. also, what else you would suggest doing intake/exhaust supports/braces rear end, etc. for a stock car to be able to handle that extra power. any advice or tips would be greatly appreciated. Thanks.
#3
Banned
iTrader: (45)
Join Date: Aug 2003
Location: NC
Posts: 2,556
Likes: 0
Received 0 Likes
on
0 Posts
I would do a search for "TR224" or "224" in the title. You will find information that will keep you busy for days. Generally a TR224 114 lsa is about the biggest cam you can go with and pass sniffer emissions (with tuning). The fact that most agree this is the best "all around" cam for the ls1 is a nice bonus good luck.
#7
Launching!
Thread Starter
Join Date: Mar 2004
Location: Wauconda, IL
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
thanks a ton guys. those mti's were the ones i was orignally lookin at. mind me asking where you ordered them through and what you paid? just so i can see what different pricing's out there for them. thanks again everyone!