No More Drag Radials
#1
Outlaw 10.5 Director
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: Commerce Twp.
Posts: 2,136
Likes: 0
Received 0 Likes
on
0 Posts
No More Drag Radials
As many already know, I was in an unfortunate accident 3mos ago. The rear end took a direct hit to the wall that completely destroyed both rear frame rails. So the next logical step was to just take the plunge and go 10.5! With an already potent Billy Briggs LS power plant it only made sense to give a call to one of the nations best race car builders... Skinny Kid Race Cars. Keith took on the job of not only rebuilding a wrecked drag radial chassis but finishing a complete roller.
Then it was off to Reiter Metalcraft for the body work and to put it in prime.
And finally back to Billy Briggs Racing Engines to put it all back together again.
Special thanks to all my Crew and their Families for supporting the late nights putting everything back together again. Joe (Stenod), Kevin, Dan, Billy. Even Keith came by to help on a Holiday weekend!
I put my daughter Lauren to work too.
Thanks again to all my Sponsors and friends who helped make this rebuild possible in such a short period of time:
Lafontaine Automotive Group
Billy Briggs Racing Engines
Mickey Thompson
Mast Motorsports
Diamond Pistons
Then it was off to Reiter Metalcraft for the body work and to put it in prime.
And finally back to Billy Briggs Racing Engines to put it all back together again.
Special thanks to all my Crew and their Families for supporting the late nights putting everything back together again. Joe (Stenod), Kevin, Dan, Billy. Even Keith came by to help on a Holiday weekend!
I put my daughter Lauren to work too.
Thanks again to all my Sponsors and friends who helped make this rebuild possible in such a short period of time:
Lafontaine Automotive Group
Billy Briggs Racing Engines
Mickey Thompson
Mast Motorsports
Diamond Pistons
Trending Topics
#8
Outlaw 10.5 Director
Thread Starter
iTrader: (9)
Join Date: Nov 2001
Location: Commerce Twp.
Posts: 2,136
Likes: 0
Received 0 Likes
on
0 Posts
Yes on the 4 link and it is satin black primer. I want to shake it down befor the winter gets here and then save up for some paint. Not finalized on the color but I am thinking about a flat metallic silver.
#10
On The Tree
iTrader: (31)
Join Date: Feb 2005
Location: Van Buren, AR
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Man...that white looked good but as my sig shows....I'm a fan of black... so I'd be fine if you left it as is But anyways, the new rear end and cage work looks awesome Tom, good luck in 10.5.
Last edited by 93BlackBeast; 09-13-2012 at 01:52 PM. Reason: Typo