baggins

iTrader: (21)

It has an internal baffle as well... any ideas?

alexcoreas

iTrader: (1)

Get this catch can from MIGHTYMOUSE

baggins

iTrader: (21)

I'm not planning on a pcv setup... just -10s coming from each valve cover

lsx1

Blueridge motorsports makes a can similar to that, not exactly the same

SMOKNSS

iTrader: (3)

I didn't know Mightymouse was making catch cans. Those are pretty baller looking... and I will need a new/bigger one for the turbo set up.

Texhotrod593

iTrader: (7)

Already used his in a turbo build! i love them and they work very well!!

Camaro9969

iTrader: (12)

Just bought one myself from him also ill show before his can and after its going to help my oil quality out I'm sure!

westtexasbuff

iTrader: (40)

www.racepartsolutions.com sells a similar one, but only with a single -12 AN fitting.

DaGreightOne

how much is the mightmouse catch can?

LS6427

iTrader: (2)

$125 shipped (boosted version)

.

LS6427

iTrader: (2)

I'm gonna use this one, just have -10 lines running to it from each valve cover, every other port will be capped off, and let the crankcase gases just push their way out to the can.
http://www.jegs.com/i/JEGS-Performan...52202/10002/-1


Like "ajrothm" has on his 23psi 408ci. No vacuum, just crankcase push. So ZERO oil going into the intake....just AIR.......keep the top end clean forever.
https://ls1tech.com/forums/17099663-post5.html

.

Sarg

iTrader: (6)

Was thinking of hooking my mightmouse catch can up to an exhaust vent to pull vacuum.

milkplus

iTrader: (3)

http://www.supraforums.com/forum/sho...se-ventilation

nhra686

Check this one http://www.gzmotorsports.com/BT2-breather-tank.html