Mr Phil

I did the best I could with that meant and getting things to line up here is a picture of it on the car there is a little gap by the driver side headlight other than that for the most part it's pretty even

if you guys want any pictures of the gaps let me know and I can go take some

Mods89

Looks pretty good! Makes me want one.

Mr Phil

Haha no u really don't, I had to spend about an hour grinding my factory hood latches where the hood bolts up to even get it like this.... if I could take it back I would go through rivet at us exotics in a heartbeat... save yourself the headache and spend the extra 200 bucks and get the real deal, not a counterfeit ripoff off Roger

Carguy8888

iTrader: (1)

does it come w/ grilles? It does look good.

Mr Phil

Yea the grilles are in there now.... They aren't put on all the way, I just set them there to give the idea of howit looks. I didn't feel like putting them on until after I got the Hood painted

AmnSF

iTrader: (12)

Lemme see a pic of the hood latch. I got an email from Roger today and I have to rig the hood latch a little bit to make it fit. He sent me the picture and I just couldn't grasp what needed to be done.

Mods89

Oh damn. lol Well it looks good now.

AlamoTA

iTrader: (10)

I just cut my latch handle about two inches and reattached. Works great!

Chris1974

I was reading some other threads yesterday (on a different site) and they were talking about the vendor that these hoods come from. "Hoods4sale", or something. Apparently, 2 people that bought their hoods had the bolt holes in the hood strip out and the hood took flight while going down the highway. I haven't seen it personally, but if it were me, I would consider using some hoodpins (yes...ugly I know)...or atleast inspect the inserts where the hood bolts to the hinges.

Mr Phil

Yep hoods4sale.... Great now I gotta go but hoodpins lol

FryZ71

Great looking hood, sucks you have to run the hoodpins though.

Mr Phil

Idk how it's gonna work though, I've never installed hoodpins before and the 2 kind at autozone were rivets type for the hood and Idk how well a rivet will hold up on fiberglass

Mister13Fister

Ok, who's this roger?
I was thinking about getting the us exotics hood from eBay, but it if its shitty quality. How can I get the real authentic deal?

Mr Phil

Us exotics is Roger, occasionally he will throw them on ebay