crazy3rdgen

iTrader: (4)

Current little mods on my camaro.. textralia z-grip, pst drive shaft, 4:10s, lid, LT's gmmg exhaust, moser axles. 10 bolt still holding up. I definitely have a cam in mind hmm haven't done much research on heads but am about to, I know they can get extremely pricey. Then I'll have to figure out a way to tune the car or have it tuned. I'm in Florida for college but will have a month break come winter to wrench just wanted to get some ideas circulating maybe a sponsor could chime in. Ill check out the for sale section also. thanks guys

sean

crazy3rdgen

iTrader: (4)

Its an m6

lcfdvette

If its just a street car I would go with a cam. If you plan on hitting the track a lot I would get a stronger rear, slicks, and a tune. Selling your 10 bolt with the 4.10s could get you a few hundred dollars to help offset the cost of another rear.

crazy3rdgen

iTrader: (4)

For right now just as a fun car that sees the street here and there not much at the track, hell I never even had slicks on her before lol!

MikeWS6

heads/cam kit from Tsp.

crazy3rdgen

iTrader: (4)

I think I was actually on there, I didn't see heads in my range, if they have a heads/cam combo i guess its possible. Let me take another look.

crazy3rdgen

iTrader: (4)

had to scroll down, good deal, thats workable I'll be looking into their packages ty

JDEP162

N2O for the win. I setup mine for less than that with some bells and whistles (pesky safety equipment too)

mjs1012

iTrader: (36)

just do a cam. If you can install it thatll make up most of your budget. Figure $1000 or so in parts(cam, springs, pushrods, gaskets, fluids, and maybe other things if you decide to) then gotta get a tune which is usually 500 or so.

Blackpanther99

iTrader: (8)

Package from TSP will get you going

Hulkls1

iTrader: (2)

Tune and 125 shot