98 Eagle Talon TSI AWD - TN - Trade for LS1 Power
#1
Teching In
Thread Starter
Join Date: Apr 2012
Location: Memphis, TN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
98 Eagle Talon TSI AWD - TN - Trade for LS1 Power
Year: 1998
Make: Eagle
Model: Talon
Price: $7500
Mileage: 141000
Private or Dealer Listing: Private Listing
Location (State): TN
Color: Gray
Transmission: Manual
Drivetrain: 4WD & AWD
LS Engine?: Car has LS engine
Make: Eagle
Model: Talon TSI AWD
Price: $7500 - $6500 obo
Mileage: 141,000
Private or Dealer Listing: Private Listing
Location: Memphis, TN
I know this is a little smaller in the displacement aspect that most folks here are used to, but this is my joy aside from my 97 6 Speed Bird. I picked this thing up as a roller with the original head after Don Polk passed away and have had it ever since.
My ultimate goal is to get into something nice and LS1 powered. I am not against Manual or Automatic, just not looking for a project. I'd also really prefer a Firebird/Trans but I'm not overly picky on that bit. So, this is up for grabs for anyone wanting to feel the joy of AWD, high revving, forced induction action. Car previously ran an 11.4, but has since seen a plethora of upgrades as well as better engine management since Polk ran it so I suspect it can do a bit better.
This is not a car owned by a young kid who takes it out and tries to street-race everything they see. I drive this vehicle at least 3-4 times a week as a daily, and take trips in it. It has yet to see the track since I've finished it but is meant to head to next years' Shootout in August. I do my best to take care of this vehicle and nothing close to a body kit, "T3/T4" upgrades, or "Stage 2 Cams" are ever mentioned as such. A lot of research has gone into the vehicle. This car was owned by a legend in the DSM community and is treated as such by me...save for the drag wheels/tires. Those aren't really daily friendly. On to the goodies.
:: Engine ::
6 Bolt Swap
Polk Built 2G Head
Dual Valve Springs
1MM Over-sized Valves
BC 272 Cams
5 Angle Grind
ARP Head Studs
Clevite 77 Rod Bearings
Ported Intake Manifold
Ported 2G Exhaust Manifold
Evo 16G Turbo
PTE Intercooler with Welded Piping (Very few couplers)
SSQV BOV
Injen Intake
Open Dump Stainless Steel 02 Housing
Braided Oil Feed Line
Air Cooled Oil Cooler
Hallman In-Cabin boost controller
Custom Oil Catch Can
EGR and Emissions Deletion
Apexi N1 Turbo Back Exhaust
Apexi Dunk Muffler
255 Wally Fuel Pump
550CC Injectors (Lucas)
:: Drivetrain ::
John Shepherd Built Transmission (4 Spider/Double 1-2 Synchros)
John Shepherd Built Transfer Case
XTD 6 Puck Sprung Disk (Custom Assembled, fully captured) and 2300# Pressure Plate
Symborski Shifter Bushing Kit
Authentic B&M shifter
:: Suspension ::
Tokico/Eibach Suspension
Ingalls Camber Kit
1 inch drop
17" DR19's
Falken Ziex ZE912 Tires
:: Tuning ::
Innovate MTX-L Wideband
Digital Boost/Oil pressure/EGT/Fuel pressure gauges
Evo Scan/Evo Flash setup
Flashable ECU
:: Perks ::
Working AC
Working Heat
Working Power Steering
Working Power Windows
Working Sunroof
Working Rear Hatch Struts
Original Cargo Privacy Cover
Complete Black Dash (Not Black/Grey Mix)
::Current Condition::
Running and Driving - Undergoing Tune Process on 20psi with 93 Oct.
I am fine with adding a little money, depending, but for something stockish and in similar condition I'd like to try to focus on a direct trade for trade. When I say a "Little Money" I don't mean half of a year's pay for the average Joe. Let's keep it reasonable. I really am not looking to put $15,000 on top of this vehicle for something.
Thanks.
Idle Video - http://www.youtube.com/watch?v=FguXP...ature=youtu.be
Last edited by XIKeiyaZI; 10-04-2013 at 03:53 AM.
#4
Teching In
Thread Starter
Join Date: Apr 2012
Location: Memphis, TN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
And you're absolutely right. Most people get them, beat on them, break something, and then pawn them off. I parked this thing for a year to go over every inch of it before I ever drove it anywhere.
Trending Topics
#9
Teching In
Thread Starter
Join Date: Apr 2012
Location: Memphis, TN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
It was originally going to see an HX35 tuned on 93 fed from 1000cc FIC injectors, but I actually played around with the streetability of the two and decided if I -was- going to go larger, I'd do no more than a 20g-ish range of power. Was never looking for an 8 second car. It was conditioned the way it is to be able to daily drive, but still have fun in and be impressive. E85 secondary tune was and still is a possibility as we have E85 available here.
Looks like you know a few things about the DSM world, though.
Looks like you know a few things about the DSM world, though.
#11
TECH Resident
iTrader: (28)
Join Date: May 2005
Location: NY
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Oh yeah bud. My car had a forged 7 bolt, hks 264/272 cams etc... And every turbo from a td05h-19c to the older td06 50trim FP Green. E85 was not around back in 98-03 when I had mine. Bought it new for $28k sold it with only 52k miles on it for a new STI.
#12
Teching In
Thread Starter
Join Date: Apr 2012
Location: Memphis, TN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Didn't figure I'd really run into anyone around here with any knowledge on these. I'm pretty excited about that! At this rate if someone picks it up, they'll know how to take care of it.
#14
Teching In
Thread Starter
Join Date: Apr 2012
Location: Memphis, TN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
#16
Not so sure how comfortable I am with this because my house is informally know as "the land of broken dsm dreams" but if you wanted to put up a few thousand in cash with it I might be interested in a trade deal. Idk. 6 hours from here to memphis.
https://ls1tech.com/forums/vehicle-c...low-miles.html
https://ls1tech.com/forums/vehicle-c...low-miles.html
#17
^the story behind the name is just that my roommate has a 1g tsi awd that he has spent a few years rebuilding on a super low budget and it's terrible and doesn't run well haha
#19
Teching In
Thread Starter
Join Date: Apr 2012
Location: Memphis, TN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Not so sure how comfortable I am with this because my house is informally know as "the land of broken dsm dreams" but if you wanted to put up a few thousand in cash with it I might be interested in a trade deal. Idk. 6 hours from here to memphis.
https://ls1tech.com/forums/vehicle-c...low-miles.html
https://ls1tech.com/forums/vehicle-c...low-miles.html
Any who, if it needs additional cash thrown in, It's likely not what I'm looking for. I sure appreciate it though.
I'll see about doing that now. I actually began the tuning process yesterday so we'll have everything tuned on a conservative 20psi with pump 93. Not too much, not too little. After I have setup the wide and to log through the ECU we will complete it - so until then it's not "completed." Same driving state it was in, but decided to go ahead and tune before getting rid of it. May just change my mind. Haha.
Last edited by XIKeiyaZI; 09-23-2013 at 09:21 AM.