Mti Stg2 R Heads
08-17-2004, 03:29 PM
#1
10 Second Club
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: Pearland,Tx
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Mti Stg2 R Heads Well is anyone runing this type of heads with stock bottom end,and want to
know what size of cam are ya'll runing
my heads are 205/160 unmill.
know what size of cam are ya'll runing
my heads are 205/160 unmill.
08-18-2004, 12:13 PM
#7
TECH Fanatic
iTrader: (3)
Join Date: Jul 2003
Location: Houston, Tx
Posts: 1,092
Likes: 0
Received 0 Likes
on
0 Posts
i think jeff is getting at the g5x2 you were talking about. i'm with him on that. i wouldn't put that cam in. the biggest i would put in would be a FMS f13. its bigger than the x1, and is on a traditional split rather than a reverse split. mti also has a g1 cam out now, with is 228 232 .588 .575 lsa 113. it's what they're billing as their nitrous cam, but it should work well in n/a application too.
Trending Topics
08-18-2004, 06:00 PM
#8
Jordan good guess but Sal already knows the G5X2 is too big for his application we are looking at a coulple of custom grinds that we cam up with and were just trying to get an idea of what other people are running etc... The G5X2 is 232/240 not where we are talking about etc... We were looking at 232 588 238 595 112LSA I have a back up if there is going to be an issues of valve clearance etc... That is what we are getting at LOL!