New best for Project FMS
#1
New best for Project FMS
Went out to No Problem today to enjoy some good weather racing <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Only two changes since the Thunder race: a swap to 4.88 gears and testing with Futral Motorsports Prototype sheetmetal intake with preliminary tuning(still have some bugs to work out, went from 455 rwhp with LS6 intake to 475 rwhp with air fuel ratio all wacked out)
Only had 2 full passes before 4th gear started popping out of gear..aghh
1st pass:
60' 1.498
330' 4.434
1/8 6.874
MPH 100.41
1000' 8.971
1/4 10.72 @ 128.62
* 45.1 deg-56% hum.-30.28" baro = -1216 DA
2nd pass:
60' 1.480
330' 4.435
1/8 6.881
MPH 100.23
1000' 8.983
1/4 10.74 @ 128.35
* 42.7 deg-65% hum-30.28" baro = -1374 DA
Both passes were at 3440 lbs
Now to finish some testing\tuning and figure out what going on with 4th gear <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" />
Only two changes since the Thunder race: a swap to 4.88 gears and testing with Futral Motorsports Prototype sheetmetal intake with preliminary tuning(still have some bugs to work out, went from 455 rwhp with LS6 intake to 475 rwhp with air fuel ratio all wacked out)
Only had 2 full passes before 4th gear started popping out of gear..aghh
1st pass:
60' 1.498
330' 4.434
1/8 6.874
MPH 100.41
1000' 8.971
1/4 10.72 @ 128.62
* 45.1 deg-56% hum.-30.28" baro = -1216 DA
2nd pass:
60' 1.480
330' 4.435
1/8 6.881
MPH 100.23
1000' 8.983
1/4 10.74 @ 128.35
* 42.7 deg-65% hum-30.28" baro = -1374 DA
Both passes were at 3440 lbs
Now to finish some testing\tuning and figure out what going on with 4th gear <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" />
#3
Launching!
Join Date: Nov 2001
Location: Native Texan
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best for Project FMS
Congrats <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> , hmmmmm...to bad about the 4th gear problem though. <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
G
<small>[ December 06, 2002, 11:27 PM: Message edited by: GTS SS ]</small>
G
<small>[ December 06, 2002, 11:27 PM: Message edited by: GTS SS ]</small>
#5
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best for Project FMS
<img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> .. kick *** times Allan! I'm glad the intake and gear swap worked well.
Oh, and no more gear installs at 3am the night before a race. <img border="0" alt="[boring]" title="" src="graemlins/gr_zzz.gif" /> I was dead today. lol
I just wish I was out there racing. It's hard racing a car with no cylinder heads on it. lol <img border="0" alt="[guns]" title="" src="graemlins/gr_guns.gif" /> <img border="0" alt="[Banging Head]" title="" src="graemlins/gr_banghead.gif" />
Jason
<small>[ December 07, 2002, 01:30 AM: Message edited by: Jason99T/A ]</small>
Oh, and no more gear installs at 3am the night before a race. <img border="0" alt="[boring]" title="" src="graemlins/gr_zzz.gif" /> I was dead today. lol
I just wish I was out there racing. It's hard racing a car with no cylinder heads on it. lol <img border="0" alt="[guns]" title="" src="graemlins/gr_guns.gif" /> <img border="0" alt="[Banging Head]" title="" src="graemlins/gr_banghead.gif" />
Jason
<small>[ December 07, 2002, 01:30 AM: Message edited by: Jason99T/A ]</small>
Trending Topics
#9
Launching!
Join Date: Nov 2001
Location: Native Texan
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best for Project FMS
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Futral Motorsports:
<strong>G- <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> your record is going DOWN
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yeah yeah yeah....I got your record right here pal! <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
G
<small>[ December 07, 2002, 01:45 PM: Message edited by: GTS SS ]</small>
<strong>G- <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> your record is going DOWN
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yeah yeah yeah....I got your record right here pal! <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
G
<small>[ December 07, 2002, 01:45 PM: Message edited by: GTS SS ]</small>
#10
TECH Fanatic
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best for Project FMS
Very nice times Allan, and that MPH is just sick.
I can't wait to see what you have in store for the new year <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I can't wait to see what you have in store for the new year <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#11
TECH Resident
iTrader: (4)
Join Date: Nov 2001
Location: Houston, TX
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best for Project FMS
Congrats, Allan! Keep up the good work!!!!
<img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
<img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
#14
TECH Addict
Join Date: Dec 2001
Location: Fort Worth,TX
Posts: 2,340
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best for Project FMS
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Chris ARE 360:
<strong>Congrats!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
You have pictures of this intake?
cheers,
Chris</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Nice times Allen and yes do you have any pics of that intake?
<strong>Congrats!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
You have pictures of this intake?
cheers,
Chris</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Nice times Allen and yes do you have any pics of that intake?
#15
!Dial-up Director
Re: New best for Project FMS
Damn that is killer mph! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> Air was killer last night, I wish I would of gone to NPR instead of SCD now if I knew all yall were going. I at least could of got it on video. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Justin
Justin
#16
"The Drag Racing Director"
iTrader: (10)
Re: New best for Project FMS
WOW! Allen, that is just bad to the bone brother. <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />
Maybe, I should go solid roller. <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />
Good luck getting everything worked out. <img border="0" alt="[angel]" title="" src="graemlins/gr_angel.gif" />
Maybe, I should go solid roller. <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />
Good luck getting everything worked out. <img border="0" alt="[angel]" title="" src="graemlins/gr_angel.gif" />
#17
Re: New best for Project FMS
Sorry guys,not wanting to release pictures at this time till I have the final version completed(working on fitment and T\B ideas)but will be worth the wait. Going through a patent search at this time. I have spent alot of time on program and flowbench testing,now doing dyno and track testing <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> .
Coach-you know you want to do a soild roller <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Justin-did you get to run your car?
Coach-you know you want to do a soild roller <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Justin-did you get to run your car?
#18
TECH Fanatic
Join Date: Aug 2002
Location: Objects in mirror no longer matter.
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best for Project FMS
That is kickass Alan! I will be starting on the motor install tomorrow, wanna give me a christmas discount on your intake? <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
#19
Re: New best for Project FMS
Thanks everybody <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
VINCE-Iam just doing my part
G- <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> your record is going DOWN
Tony-thanks,what I tell you from the beginning-now just wait till I put this nitrous kit on I have hanging around <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Jason-you rookie,hell we were finished at 1:15 just talked to 3:00. Your car is gonna fly once you get everything worked out <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
Frank-thanks for the water at the burnout box,stupid sideways burnout from the guy not giving me some WATER
Mikey-yall 9-sec N\A guys have a while before you have to worry about me <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> but I like mixing it up with the big c.i. guys <img border="0" alt="[fight]" title="" src="graemlins/gr_punch.gif" />
ROBSS-thanks, I will be in the 9's soon with the help of some nitrous.
VINCE-Iam just doing my part
G- <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> your record is going DOWN
Tony-thanks,what I tell you from the beginning-now just wait till I put this nitrous kit on I have hanging around <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Jason-you rookie,hell we were finished at 1:15 just talked to 3:00. Your car is gonna fly once you get everything worked out <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
Frank-thanks for the water at the burnout box,stupid sideways burnout from the guy not giving me some WATER
Mikey-yall 9-sec N\A guys have a while before you have to worry about me <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> but I like mixing it up with the big c.i. guys <img border="0" alt="[fight]" title="" src="graemlins/gr_punch.gif" />
ROBSS-thanks, I will be in the 9's soon with the help of some nitrous.
#20
TECH Enthusiast
iTrader: (1)
Join Date: Nov 2001
Location: Brandon, MS
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
Re: New best for Project FMS
Alan,
I am Ray's friend ..we met @ thunder shootout...don't you need an a4 guniea pig for your intake? I have a solid low 10sec.(on spray) car begging for an intake.
Shawn
I am Ray's friend ..we met @ thunder shootout...don't you need an a4 guniea pig for your intake? I have a solid low 10sec.(on spray) car begging for an intake.
Shawn