Is this a good cam?
#1
TECH Fanatic
Thread Starter
iTrader: (10)
Join Date: Mar 2004
Location: Joliet, IL
Posts: 1,967
Likes: 0
Received 0 Likes
on
0 Posts
Is this a good cam?
Hey guys i have a question, im not too familiar with internal stuff, but i found a pretty good deal on this cam TSP 231/237 .595/.598 112lsa, i was wondering if this is a good cam to get? i dont have headers yet, but i am gonna be getting some soon, so i wouldnt put the cam in until i get my headers, but at the price its goin for i dont wanna pass it up. My car is a daily driver, so im lookin for something that still will do pretty good for a daily driver, and produce some good number also. And some nice lope would be good too..lol..thanks for the help and let me know
JacobK
JacobK
#3
It lopes pretty hard, and with the right tuning it is very daily driveable... as long as you can live with the loudness, of course.
Also, with the big cam/heavy exhaust duration you'll have a lot of raw fuel smell if you go with headers and no cats... that's what I did, and even though I'm tuned there's still quite a bit of that smell. I'll be adding a catted y-pipe this off-season to remedy that a little.
Also, with the big cam/heavy exhaust duration you'll have a lot of raw fuel smell if you go with headers and no cats... that's what I did, and even though I'm tuned there's still quite a bit of that smell. I'll be adding a catted y-pipe this off-season to remedy that a little.
#4
TECH Fanatic
The TSP 231/237 is a very good cam.This cam will run in a daily driver.I would recommend you get all of the bolt ons.This cam has a very nice lope,and makes great power.I would run a good dual spring with this cam.The best spring IMO is the Precision Race Components dual spring kit.
#6
TECH Fanatic
iTrader: (2)
Join Date: May 2003
Location: Missouri
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
How does the PRC spring kit compare to Patriot, Comp, and Crane? Cost wise, performance, durability, etc.? Does the kit include titanium retainers, hardened pushrods, Spring retainers, the works? I have not heard anything about these.
#7
TECH Fanatic
The PRC kit comes with the works.It includes dual springs good to .660 valve lift,Titanium retainers,seat bases and new seals.Durabilty is as good as it gets,with the PRC dual springs.This spring Kit is price competitive at @ $289.95.
Last edited by Terry@RacetechSpeed; 10-11-2004 at 04:49 PM.
Trending Topics
#8
!LS1 11 Second Club
Love the cam. Pulls HARD up top. Could use a tad bit more tq. down low however.
But, that said, I doubt this cam is coming off my car any time soon. I've had it about a year on my daily driver and am very happy with it.
But, that said, I doubt this cam is coming off my car any time soon. I've had it about a year on my daily driver and am very happy with it.
#9
TECH Fanatic
Thread Starter
iTrader: (10)
Join Date: Mar 2004
Location: Joliet, IL
Posts: 1,967
Likes: 0
Received 0 Likes
on
0 Posts
So what other parts am i gonna need besides just the cam? Sorry for such a basic question, im just getting into likethe bigger mods and stuff so i dont really know too much
#10
!LS1 11 Second Club
Originally Posted by JacobK
So what other parts am i gonna need besides just the cam? Sorry for such a basic question, im just getting into likethe bigger mods and stuff so i dont really know too much
Also, refer to ls1howto.com for the cam install checklist for the parts necessary for the actual swap.
Rear end gears are a good mod for a cam like this.
Make sure you do most (if not all) of the intake and exhaust bolt-on mods before getting a cam.
You will also need to tune for the new setup.
#13
STF Veteran
Join Date: Oct 2003
Location: Greensboro, North Carolina
Posts: 3,486
Likes: 0
Received 0 Likes
on
0 Posts
It is going to be a good cam. Like South said you might suffer a little in the low end torque but I think you will make up for it in the upper rpm's. Good luck.
#16
TECH Regular
Join Date: Nov 2001
Location: San Diego, Ca / Tucson,AZ
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
I'll take my lope over a wwwwwhhhiiiiizzzz any day. As cool as they sound, all the damn ricers have ruined the sound for me. espeically the ones with the ones with the whistler that makes it sound as if they have a turbo.