Demon SS

iTrader: (3)

We here at FFHP are moving to a 8000sq ft facility and are adding a full engine shop. We are also adding 3-4 more people to assist in phone answering and general labor.

To kick off our move to the new shop we are going to offer an LS1 ShortBlock Sale!

408ci iron block
New 6.0L block
Eagle Forged LS1 Crank 4" Stroke
Callies LS1 Rods
Diamond Pistons
Diamond Pro-Select Rings
Federal Mogul Main Bearings
Federal Mogul Rod Bearings
Clevite Cam Bearings
ARP Main Studs

Short block fully balanced, blueprinted and assembled

Price $3699.99 no core or core charge(shipping not included)

We can do a full 408ci Long Block for $5879.99
includes everything above plus
Custom Cam
LS6 Ported oil pump
Rollmaster Double Adj timing chain
Comp Cams Lifters(850-16's)
Stage 3 Heads
Assembled

or a Forged 347
LS1 or LS6 5.7L Alum. Block
Stock Crank Polished and Magnafluxed
Callies LS1 Rods
Diamond Pistons
Diamond Pro-Select Rings
Federal Mogul Main Bearings
Federal Mogul Rod Bearings
Clevite Cam Bearings
ARP Main Studs
Short block fully balanced, blueprinted and assembled

Price $2899.99 no core or core charge

Full 347 Long Block for $5079.99
includes everything above plus
Custom Cam
LS6 Ported oil pump
Rollmaster Double Adj timing chain
Comp Cams Lifters(850-16's)
Stage 2 Heads
Assembled


Aluminum Block Darton M.I.D Sleeved 427ci
Sleeved LS1 Block
Eagle Forged LS1 Crank 4" Stroke
Callies LS1 Rods
Diamond Pistons
Diamond Pro-Select Rings
Federal Mogul Main Bearings
Federal Mogul Rod Bearings
Clevite Cam Bearings
ARP Main Studs
Short block fully balanced, blueprinted and assembled

Price $6099.99

Full 427 Long Block $8393.99
includes everything above plus
Custom Cam
LS6 Ported oil pump
Rollmaster Double Adj timing chain
Comp Cams Lifters(850-16's)
Stage 3 Big Bore Heads
Assembled

Prices do not include shipping. Shipping is done freight collect. Engine is shipped in a custom built wooden crate.

Other engine packages and options are available, just give us a call to discuss your needs!

Sale runs for 2 weeks from today(until May 22 2005) or until 10 shortblock are sold atthe above prices,whichever comes first.

We give a 12 month warranty on these setups as long as they stay N/A.

Demon SS

iTrader: (3)

bump.

Demon SS

iTrader: (3)

6 left

osuhunter07

iTrader: (10)

i will be ordering this week! THANKS!

Demon SS

iTrader: (3)

402 LS2 Aluminum Short Block
New LS2 block
Eagle Forged LS1 Crank 4" Stroke
Callies LS1 Rods
Diamond Pistons
Diamond Pro-Select Rings
Federal Mogul Main Bearings
Federal Mogul Rod Bearings
Clevite Cam Bearings
ARP Main Studs
Price $4179.99

we still have a few slots open, but are close to the limit of 10
I'll post a list of confirmed orders at the end of the first week.

I also have a high end 408 long block ready to go( Callies Magnum Crank, Oliver Billet Rods, Stage 3 LS6 heads, etc.). I'll post full details and price later this afternoon.
Thanks!

Moralesrx7

iTrader: (1)

Bump for a great customer service, unlike some

JMBLOWNWS6

iTrader: (17)

I will admit that. Went thru some drama but all in all they kept there word. Still dont know what brand of pushrods I have

Demon SS

iTrader: (3)

We get them from PEP. they are a .065 wall hardened chromoly

JMBLOWNWS6

iTrader: (17)

Thank you sir Ill feel alot better now putting them in the new motor

Demon SS

iTrader: (3)

408ci IronBlock Race Engine

6.0L Iron Block Bored .030 Over
Callies Magnum Plus LS1 Crank 4" Stroke
Oliver Billet I-Beam Rods w/Oliver/ARP WSB 7/16" Rod Bolts
Diamond Flat Top Pistons -2cc Reliefs
Diamond Pro-Select File Fit Rings
Clevite Main Bearings
Clevite Rod Bearings
Clevite Cam Bearings
ARP Main Studs

Short Block has been bored and honed using a BHJ torque plate and the deck resurface using a BHJ Blok-Tru fixture.
Meticulous adherence to all critical tolerances maintained.
Rotating assembly balanced. --SOLD

Long Block also includes
Custom Laser Cams hyd. roller cam (250/262 .651/.654 112LSA)
Shubeck Lifters
Roll Master Double Roller Timing Chain
ARP Head Studs
Cometic Gaskets

Stage 3 LS6(243castings) Large Bore Heads
New Castings
Fully Stage 3 CNC'd
Hi-Chrome Valve Seats
Ferrea 2.08 Intake Valves
Ferrea 1.60 Exhaust Valves
Comp Cams 921 Springs Kit
5 Angle Valve Job
Milled .010

Intake Runners 238cc
Exhaust Runners 87cc
Combustion Chamber 68cc

Flow Numbers
Lift Intake Exhaust
.100 73 55
.200 146 110
.300 212 161
.400 265 207
.500 306 238
.600 328 246

Flowed on a 4.030 bore with inlet radius, exhaust flowed w/pipe

Price $9949.00 plus shipping.

This setup is in house and ready to ship with in a couple of days. This engine was built to go in my drag car but I have again changed directions.

Pro Stock John

iTrader: (34)

Please post when you hit 10.

Demon SS

iTrader: (3)

John, not a problem! I have planned from the start to post updates on confirmed order status. For reasons well know to all, we want to do this in a manner that is comfortable/reassuring to the buyer. For now the list looks like this:

Moralesrx7- 347 shortblock
Local customer- 347 shortblock
aussie customer- 383 shortblock
LS1Tech member- 408 ironblock(for now customer wishes to be un-named)

strong probables
LIL SS- 347 shortblock
Hawaiian customer

ls1newbie

What about a alum 408 shortblock for boost?
Not to sound rude but do you guys have any fast cars out there?
I really don't know anything about you...

dragonZ28

iTrader: (32)

Oh yeah, there are plenty of fast cars around KY. I have some friends running Demon's heads, and their cars picked up sweet power gains. He is giving customers piece of mind by refraining from overwhelming himself with many orders like that other place did. He can crack out 10 shortblocks with no problems.

Moralesrx7

iTrader: (1)

bump

Demon SS

iTrader: (3)

ls1newbie- it is certainly not rude to ask questions about who we are and what we have out there. i encourage folks to ask questions.
our last 4 local heads/cam cars put down some good numbers on the dyno,
3 in the 430rwhp range (M6 cars), 1 in the 390-400rwhp range(built 4L60E 3200 stall) on a Superflow dyno(think Mustang dyno). these guys all live in Kentucky and have 1/8 times in the mid to high 7's.

this car has our heads
http://temp.corvetteforum.net/c5/99z51r/

our last shop car ran 11.4 at 122mph stage 2.5 5.3L heads 232/238 cam, stock bottom end.

I sent you a pm on the 408 setup

O2bqwik

iTrader: (6)

ill prolly be calling tommorow or wen. to order a 408.

Demon SS

iTrader: (3)

we look forward to your call!

O2bqwik

iTrader: (6)

Just ordered mine thanks alot guys!

Demon SS

iTrader: (3)

no thank you.

looks like we have 2 left. or 5 more days (saturday)