Billiumss

iTrader: (11)

I'm going to be SD tuning a few C5 strokers with in the next few months and I would like to buy a adaptor for the MAF so I can still read the IAT through the MAF.

- Where can you buy one at?
- Any sponsors sell them?
- How much are they usually?

Thanks guys....

Bill

MeentSS02

iTrader: (11)

Sending you a PM...

foff667

iTrader: (2)

hey send me a pm too

Billiumss

iTrader: (11)

Thanks, I need a IAT pass through MAF connector for a C5.

jimmyblue

iTrader: (11)

Casper's --> is your buddy.

SSpdDmon

iTrader: (10)

When you force the car into SD by changing the MAF Fail Freq, does this kill the IAT reading too on the newer C5's?

maxxxboost

U just set the maf freq. (all) to zero . but u have to keep the maf in order to use the built in IAT . but u have to keep the maf connected since the Iat is built in the maf. well there is an IAt relocation kit at ecklers that way u can use an external IAT setup and u wont need the maf anymore.

SmokingWS6

iTrader: (1)

above is correct. You don't need to physically unplug the maf for SD tuning. Setting the maf fail frequency yeilds the same results. Also do not disable the ses code you'll get while the maf is off.