Best cam only cam
#1
TECH Resident
Thread Starter
iTrader: (94)
Join Date: May 2003
Location: port st lucie florida
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
Best cam only cam
I searched and found nothing.What in your experience is the best cam only cam .My friend has a 2002 ls6 motor and full bolt on's.He doesnt want to do any flycutting to get were he wants so that very important.Driveability is not a concern either.PLEASE not a ton of questions, just what you know from your experience.Thanks everybody.
#2
!LS1 11 Second Club
Whatever. TSP MS3 or Torquer II or Thunder 230/224 or 230/236 or Futral F11 or F13 or................................................ .................................................. .................................................. ..............TR224 or.................................
M6, A4, ? Stall? Rear gear?
Questions are important in a cam match.
M6, A4, ? Stall? Rear gear?
Questions are important in a cam match.
#5
TECH Resident
Thread Starter
iTrader: (94)
Join Date: May 2003
Location: port st lucie florida
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
m6 ,3.90s,kooks 1 7/8 x pipe bullets,fast 90/90 ,pulley, will use 200 shot of spray also.
wants to shift at 7000 rpm, wants the most power possible with this setup.
I was saying that from your cars that ran cam only type setups "the really fast ones" what did your cars do power wise ,with what cam and specs ,I was not intending another pick my cam for me tread sorry if it came off that way.
wants to shift at 7000 rpm, wants the most power possible with this setup.
I was saying that from your cars that ran cam only type setups "the really fast ones" what did your cars do power wise ,with what cam and specs ,I was not intending another pick my cam for me tread sorry if it came off that way.
#7
TECH Fanatic
iTrader: (1)
Join Date: May 2004
Location: Mesa, Arizona
Posts: 1,691
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GTFORMULA
m6 ,3.90s,kooks 1 7/8 x pipe bullets,fast 90/90 ,pulley, will use 200 shot of spray also.
wants to shift at 7000 rpm, wants the most power possible with this setup.
I was saying that from your cars that ran cam only type setups "the really fast ones" what did your cars do power wise ,with what cam and specs ,I was not intending another pick my cam for me tread sorry if it came off that way.
wants to shift at 7000 rpm, wants the most power possible with this setup.
I was saying that from your cars that ran cam only type setups "the really fast ones" what did your cars do power wise ,with what cam and specs ,I was not intending another pick my cam for me tread sorry if it came off that way.
Trending Topics
#8
Hey LS1 BU, have you guys ever tuned an EDC cam? I'm kinda in the same boat as GTFormula. (4.10s, M6, Hooker Full Exhaust) I want to eventually do heads, but tight on money right now....(12 bolt kicked my wallet's ***)
#9
TECH Enthusiast
iTrader: (4)
Join Date: Apr 2002
Location: Hoover, Alabama
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Another vote for the MS3. I put down 401 rwhp/364 rwtq through a 9" w/ 315/35s on the back. That was with the MS3, stock heads, full bolt-ons and LS6 intake. I'll be getting new numbers soon with the FAST 90/NW 90 setup, and it'll be getting tuned for the spray too. I'll post up my results after I get it tuned in a few weeks.
#10
11 Second Club
Join Date: Jun 2005
Location: Was New Orleans, but swam to Baton Rouge
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
The F14 works great in my Z06. I do not have all the boltons, but just the important ones. I made 423 rwhp and 408 rwtq with my setup.