Chaotic Firebird

A question for those that have the HotCam or CC305 cam.

What times are you running in the quarter, and how much horsepower are you putting down? Also, please list what mods you have with the cam. Thanks

foggedz

iTrader: (1)

Full boltons, CC305 cam. 11.907 with a 1.60 60foot. This time was with a 20mph head wind, but good air. I figure the car might go just a little faster in average air with out the wind, but Ill find out for sure in a few months. Looking to go faster next year, by droping a good amount of pounds, better tune, and a few other small things.

MY99TAWS6

iTrader: (3)

Foggedz can I have your exact mods..is your car an auto or m6..assume you had drag tires on the car to get a 1.6 60ft.I have auto with 3.42 and 2800 vig.Have CC305 to install and 1.6 pro mags.Already have little bolt ons like asp underdrive,58 bbk tb,30 svos planning on kooks longtubes and LE2 heads.
Car is a vert though and heavy over 3800 raceweight.
Would be real happy with an 11.9 off spray.Have zex wet kit to install this season also.

foggedz

iTrader: (1)

The car used to be a M6, but I swaped to a th350 with a 4100 stall. The car has pretty much every bolton. 1.6RR, stock injectors, longtubes, xpipe, etstreets, QA1s, 3550 with me in it. Im looking to get it down to 3350-3400 with me in it for next year. I also have a upper RPM miss that I have been unable to track down. Im hoping that with a new MSD opti and droping a few pounds, I can drop my times a little.

RoAdRaGe912

damn, that is moving.

i wasn't able to get mine to the track for decent times before i wrecked it, but with simple bolt ons i went 13.4 on street tires. now with the hotcam and DRs i'm shooting for mid 12s. hopefully the car will be on the street tomorrow and i'll be at the track as soon as i can strap some DRs on it.

stevemilz

iTrader: (3)

CC305 Never took my car to the track due to no cage, but my car moves on the street (enough to pull the wheels about a foot in the air with a 5,000 launch).

Cammed95Z28

12.20's at 115... AS&M headers, custom 3inch exhaust no cat, hotcam kit, fully ported LT1's with 2.02 intake, 1.55 exhaust, forged 355 with high comp pistons, 4.10's, aluminum DS, Nitto's......Soon to be GM847 ed

streetrod93

iTrader: (8)

cc305, 355 bottom end, stock castings with a little bowl work and a 5 angle valve job, full boltons, 3.73 gear in a M6 on street tires after a GOOD tune

all motor, 12.47 @ 115.7

Cammed95Z28

Is that with 1.5's or 1.6's?? Looks like we run really similar... The hotcam and cc305 are pretty close right?

Black94lt1

iTrader: (1)

396 stroker, hot cam, ported lt1 heads, 3600 stall, 3.73 gears, other bolt ons & still working on the tune i ran 12.50's with a 1.57 60'.

Rare96WS6

12.20@111 with Hot cam. SS3600 stall, Ported heads, AS&M headers, and Borla.
Power is 380rwhp/363rwtq. This was my first time out with the new stall. I had never run a car before with an after market one. Prior to the stall I was hitting 12.5's, so as you can see there are a few tenths to be picked up from that converter.

Hambone 7

Low 12/high 11 with a 3000 stall, hot cam, and LE1 heads.