LastHawk02

iTrader: (1)

Well, so far i have borla, a lid, z06 MAF, and i just ordered my headers i wsa thinking going with a cam next? any other ideas?

conan

iTrader: (5)

If pre 01-02 get a ls6 intake if you already have it a cam would be good. Heads if you have the $$, SFC's, LCA's, panhard, ect.

SPLATT

iTrader: (1)

did the lid make any difference, i was gonna buy one but i was also thinking, it has a blackwing, so aftermarket shouldnt flow TOO much more...anyway not tryin to thread jack, just wondering..and SFCs do wonders

CRAGER

Well don't forget to get some plugs and wires for the header swap.

Sub-frame connectors are a MUST HAVE, also a break upgrade is good. Alot of people just want speed, but they forget that the stock rotors are crap and warp easily.

As far as the cam goes, just make sure you pick the one that YOU want. Research all of the cams, and pick one for your driving style. Then make sure you get it dyno tuned and you shoud be set.


Peace,
Craig.

LastHawk02

iTrader: (1)

yeah i am going to do new plugs and wires when i get the headers, i already replaced the front rotors cause they warped... i wsa thinking about the MS3 cam, it's not a daily driver so...and for the lid i still have the blackwing and i like it so i just gonna keep that

STRETCH'S T/A

iTrader: (13)

if you have an A4 i would look into a stall

LastHawk02

iTrader: (1)

no it's a M6

Zymosis

iTrader: (7)

Shifter, so we dont have to read a post about you missing a shift and bending push rods

Lucas'02SS

iTrader: (4)

A cam would be nice, but subframes are a must!!! I would do those before you do more modding.