What would the best exhaust option for me be?
09-02-2006, 09:56 AM
#1
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Feb 2005
Location: Lagrangeville, NY
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
What would the best exhaust option for me be? hey guys i have a 02 ws6 that i am almost done building a 455 ci ls1 for it. the motor should have about 650 hp to the flywheel and now i am to the point of picking out my exhaust, but i am not sure of what to go with. I want to put true duals on it, but i also want the exhaust to come out in the back of the factory spots, so i would either have to go under/over the axle. i was looking at the bassani true dual setup but thats only 2.5 inch pipes and i read that if i have over 500 hp i should go with 3". The car will be at stock ride height. I will have kooks 1 3/4" stepped to 1 7/8" headers and slp 3" high flow cats. Are there any other companies out there that make a 3" true dual out the back. Please help
Thanks for your time
Jon
Thanks for your time
Jon
BOSS APPROVED!
09-02-2006, 10:21 AM
#3
Bassani is the only out the back kit for our cars. The other kits are just dumps that you will have to get welded up to go out back. Bolt-on out the back kits just don't exist for our cars. And yeah, don't settle for less than 3" pipes for that setup.
09-02-2006, 02:18 PM
#6
Nice wet sleeved setup....
You can get a set of duals fabbed for it no problem. Just finding the right person and price is the tough part. TheBlurLS1 is trying to sell his. They go all the way out the back. really nice setup. Let me go and find you the link.
You can get a set of duals fabbed for it no problem. Just finding the right person and price is the tough part. TheBlurLS1 is trying to sell his. They go all the way out the back. really nice setup. Let me go and find you the link.
Trending Topics
09-02-2006, 09:19 PM
#8
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Feb 2005
Location: Lagrangeville, NY
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the help and advice, i will deff go all the way out the back with true duals, i guess i just have to find somone locally to make me an exhuast. thanks for the link orangeapeel
Jon
Jon
09-02-2006, 09:26 PM
#9
TECH Fanatic
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Custom 3" true duals out the back with Flowmaster 1 chambers on your 455 would sound unreal.
I'd personally hunt you down if you went that route and didn't post a sound clip.
I'd personally hunt you down if you went that route and didn't post a sound clip.
09-04-2006, 04:10 PM
#10
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Feb 2005
Location: Lagrangeville, NY
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the advice, i guess ill just try to find somone who can make a good system for me. once it is done, i will deff post a sounds clip.
Jon
Jon
09-04-2006, 04:31 PM
#12
TECH Senior Member
iTrader: (1)
Join Date: Apr 2005
Location: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Posts: 8,810
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Louie83
Custom 3" true duals out the back with Flowmaster 1 chambers on your 455 would sound unreal.
I'd personally hunt you down if you went that route and didn't post a sound clip.
I'd personally hunt you down if you went that route and didn't post a sound clip.
09-04-2006, 05:17 PM
#14
TECH Senior Member
iTrader: (1)
Join Date: Apr 2005
Location: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Posts: 8,810
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Louie83
^^ Where did you get dual-dual 4" stainless tips?
You are only about the 100th person to ask me where to get them/or would I sell them..never seen any others quite like them... 
