Procharger intake hat
#1
Launching!
Thread Starter
Procharger intake hat
i need a new one... mines beyond repair. anyone on here sell aftermarket stuff or do i really have to go through procharger and how long will that take? uuugh!
#5
Something I came across today, which I will be ordering up tomarrow.
http://www.globaltecheng.com/Product...erLineRadius=6
4inch 90 degree Aluminum Elbow.
If I am not allowed to post this, please delete it.
http://www.globaltecheng.com/Product...erLineRadius=6
4inch 90 degree Aluminum Elbow.
If I am not allowed to post this, please delete it.
#6
Originally Posted by Urban Legend
Can you post pics of your inlet hat creations?
#7
TECH Enthusiast
iTrader: (4)
Join Date: May 2004
Location: council bluffs Iowa
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by T/A KID
Something I came across today, which I will be ordering up tomarrow.
http://www.globaltecheng.com/Product...erLineRadius=6
4inch 90 degree Aluminum Elbow.
If I am not allowed to post this, please delete it.
http://www.globaltecheng.com/Product...erLineRadius=6
4inch 90 degree Aluminum Elbow.
If I am not allowed to post this, please delete it.
Trending Topics
#8
TECH Addict
iTrader: (5)
Join Date: Mar 2002
Location: VA
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Im selling bunch of ATI stuff here... Check it out https://ls1tech.com/forums/lsx-parts-sale/600950-fs-ati-sc-intercoolers-pullies-etc.html
#9
Launching!
iTrader: (9)
Join Date: Feb 2004
Location: Virginia
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NOSjohn
To be honest, we haven't made any specific to superchargers. However, if it is any type of metal, WE CAN MAKE IT...and make it GOOD.
From the all the threads I have read in this forum I believe that if you sell a "reasonably priced" metal inlet hat for the ATI head unit you would probably sell quite a few.
#10
TECH Resident
iTrader: (4)
Originally Posted by v8juice
From the all the threads I have read in this forum I believe that if you sell a "reasonably priced" metal inlet hat for the ATI head unit you would probably sell quite a few.
#11
TECH Enthusiast
iTrader: (4)
Join Date: May 2004
Location: council bluffs Iowa
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Did you guys see the one that Moparnos(The SLP Guy) did for Jimmy P ? It was with a piece that he got from the chassisshop.com it was in mild steel. It would be nice in alum. It was 4" radius 4"ID donut. I don't think the chassis shop does alum though. Moparnos did a beautiful job. He da man.
Last edited by BOONE; 10-31-2006 at 07:01 AM.
#12
TECH Regular
iTrader: (5)
I am on my third plastic POS (150.00 ea) and have a donor if anyone is willing to use is to fab up an aftermarket replacement. I have been thinking of experimenting with different tubing myself but am not a fabricator.
Fig
Fig
Last edited by topfig1; 10-31-2006 at 11:25 AM.
#13
Originally Posted by topfig1
I am on my third plastic POS and have a donor if anyone is willing to use is to fab up an aftermarket replacement. I have been thinking of experimenting with different tubing myself but am not a fabracator.
Fig
Fig
#18
TECH Fanatic
iTrader: (10)
Join Date: Nov 2001
Location: Mont Belvieu, Tx.
Posts: 1,458
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by v8juice
From the all the threads I have read in this forum I believe that if you sell a "reasonably priced" metal inlet hat for the ATI head unit you would probably sell quite a few.
Any duct work directly attatched will close on itself under boost...
Temporary solution...
If someone could make this out of aluminum and it flow well enough this might be the ticket for people with little room to work and not enough room for a 90 degree (or closer) radius elbow...
#19
9 Second Club
iTrader: (14)
Originally Posted by BoostedWS7
i need a new one... mines beyond repair. anyone on here sell aftermarket stuff or do i really have to go through procharger and how long will that take? uuugh!
I have my stock one. Has a little rub on the face but is otherwise in tact. I don't need it anymore since I made a different hat. If your interested in it let me know.
#20
Launching!
Thread Starter
****!. well, earlier today i just bit the bullet and ordered the hat and stuff directly from procharger. wanted the stuff by the weekend. i shoulda waited til i got back to the thread to see if i had responces.... coulda saved some $. ohhhhwelll!