BOSS APPROVED!
Procharger intake hat
Thread Starter
Launching!
Joined: Jun 2004
Posts: 236
Likes: 4
From: Kintnersville, PA
Procharger intake hat i need a new one... mines beyond repair. anyone on here sell aftermarket stuff or do i really have to go through procharger and how long will that take? uuugh!
Something I came across today, which I will be ordering up tomarrow.
http://www.globaltecheng.com/Product...erLineRadius=6
4inch 90 degree Aluminum Elbow.
If I am not allowed to post this, please delete it.
http://www.globaltecheng.com/Product...erLineRadius=6
4inch 90 degree Aluminum Elbow.
If I am not allowed to post this, please delete it.
Originally Posted by Urban Legend
Can you post pics of your inlet hat creations?
Originally Posted by T/A KID
Something I came across today, which I will be ordering up tomarrow.
http://www.globaltecheng.com/Product...erLineRadius=6
4inch 90 degree Aluminum Elbow.
If I am not allowed to post this, please delete it.
http://www.globaltecheng.com/Product...erLineRadius=6
4inch 90 degree Aluminum Elbow.
If I am not allowed to post this, please delete it.
not trying to discourage, I would still do it. 
Trending Topics
Im selling bunch of ATI stuff here... Check it out https://ls1tech.com/forums/lsx-parts-sale/600950-fs-ati-sc-intercoolers-pullies-etc.html
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by NOSjohn
To be honest, we haven't made any specific to superchargers. However, if it is any type of metal, WE CAN MAKE IT...and make it GOOD.
From the all the threads I have read in this forum I believe that if you sell a "reasonably priced" metal inlet hat for the ATI head unit you would probably sell quite a few.
Originally Posted by v8juice
From the all the threads I have read in this forum I believe that if you sell a "reasonably priced" metal inlet hat for the ATI head unit you would probably sell quite a few.
Did you guys see the one that Moparnos(The SLP Guy) did for Jimmy P ? It was with a piece that he got from the chassisshop.com it was in mild steel. It would be nice in alum. It was 4" radius 4"ID donut. I don't think the chassis shop does alum though. Moparnos did a beautiful job. He da man. 
Last edited by BOONE; Oct 31, 2006 at 07:01 AM.
I am on my third plastic POS (150.00 ea) and have a donor if anyone is willing to use is to fab up an aftermarket replacement. I have been thinking of experimenting with different tubing myself but am not a fabricator.
Fig
Fig
Last edited by topfig1; Oct 31, 2006 at 11:25 AM.
Originally Posted by topfig1
I am on my third plastic POS and have a donor if anyone is willing to use is to fab up an aftermarket replacement. I have been thinking of experimenting with different tubing myself but am not a fabracator.
Fig
Fig
Originally Posted by v8juice
From the all the threads I have read in this forum I believe that if you sell a "reasonably priced" metal inlet hat for the ATI head unit you would probably sell quite a few.
Any duct work directly attatched will close on itself under boost...
Temporary solution...
If someone could make this out of aluminum and it flow well enough this might be the ticket for people with little room to work and not enough room for a 90 degree (or closer) radius elbow...
Originally Posted by BoostedWS7
i need a new one... mines beyond repair. anyone on here sell aftermarket stuff or do i really have to go through procharger and how long will that take? uuugh!
I have my stock one. Has a little rub on the face but is otherwise in tact. I don't need it anymore since I made a different hat. If your interested in it let me know.
Thread Starter
Launching!
Joined: Jun 2004
Posts: 236
Likes: 4
From: Kintnersville, PA
****!. well, earlier today i just bit the bullet and ordered the hat and stuff directly from procharger. wanted the stuff by the weekend. i shoulda waited til i got back to the thread to see if i had responces.... coulda saved some $. ohhhhwelll!