Looking for Feedback on Custom LS2 Cam
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2006
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Looking for Feedback on Custom LS2 Cam
I have a LS2 GTO that is stock except for Kook's 1 7/8" headers with offroad pipes, LPE air intake and HPTuners. I want a cam similar to Patrick's torque cam, but for a 6.0L.
Here is what I came up with, using LSK lobes. 228/232 .639/.643 111 LSA. This gives me a DCR of 8.36 with .060" head gaskets and 8.79 DCR with .040" gaskets, leaving some room for future head swaps. I could bring the LSA to 110, this would give 10 deg of overlap and bring up the DCR. Either way I think the valve events look pretty good.
Ok, I would like to hear what you think.
Valve Lift .006 .050 .200
Intake Dur. 277 228 153
Exhaust Dur. 281 232 156
Lobe Center Line 111 111 111
Intake Center Line 111 111 111
Intake Valve Open 27.5 3 -34.5
Intake Valve Close 69.5 45 7.5
Exhaust Valve Open 71.5 47 9
Exhaust Valve Close 29.5 5 -3.3
Exhaust Center Line 111 111 111
Overlap 57 8 -67.5
Here is what I came up with, using LSK lobes. 228/232 .639/.643 111 LSA. This gives me a DCR of 8.36 with .060" head gaskets and 8.79 DCR with .040" gaskets, leaving some room for future head swaps. I could bring the LSA to 110, this would give 10 deg of overlap and bring up the DCR. Either way I think the valve events look pretty good.
Ok, I would like to hear what you think.
Valve Lift .006 .050 .200
Intake Dur. 277 228 153
Exhaust Dur. 281 232 156
Lobe Center Line 111 111 111
Intake Center Line 111 111 111
Intake Valve Open 27.5 3 -34.5
Intake Valve Close 69.5 45 7.5
Exhaust Valve Open 71.5 47 9
Exhaust Valve Close 29.5 5 -3.3
Exhaust Center Line 111 111 111
Overlap 57 8 -67.5
Last edited by NoMoreFWD; 01-17-2007 at 04:58 PM.
#2
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NoMoreFWD
I have a LS2 GTO that is stock except for Kook's 1 7/8" headers with offroad pipes, LPE air intake and HPTuners. I want a cam similar to Patrick's torque cam, but for a 6.0L.
Here is what I came up with, using LSK lobes. 228/232 .639/.643 111 LSA. This gives me a DCR of 8.36 with .060" head gaskets and 8.79 DCR with .040" gaskets, leaving some room for future head swaps. I could bring the LSA to 110, this would give 10 deg of overlap and bring up the DCR. Either way I think the valve events look pretty good.
Ok, I would like to hear what you think.
Valve Lift .006 .050 .200
Intake Dur. 277 228 153
Exhaust Dur. 281 232 156
Lobe Center Line 111 111 111
Intake Center Line 111 111 111
Intake Valve Open 27.5 3 -34.5
Intake Valve Close 69.5 45 7.5
Exhaust Valve Open 71.5 47 9
Exhaust Valve Close 29.5 5 -3.3
Exhaust Center Line 111 111 111
Overlap 57 8 -67.5
Here is what I came up with, using LSK lobes. 228/232 .639/.643 111 LSA. This gives me a DCR of 8.36 with .060" head gaskets and 8.79 DCR with .040" gaskets, leaving some room for future head swaps. I could bring the LSA to 110, this would give 10 deg of overlap and bring up the DCR. Either way I think the valve events look pretty good.
Ok, I would like to hear what you think.
Valve Lift .006 .050 .200
Intake Dur. 277 228 153
Exhaust Dur. 281 232 156
Lobe Center Line 111 111 111
Intake Center Line 111 111 111
Intake Valve Open 27.5 3 -34.5
Intake Valve Close 69.5 45 7.5
Exhaust Valve Open 71.5 47 9
Exhaust Valve Close 29.5 5 -3.3
Exhaust Center Line 111 111 111
Overlap 57 8 -67.5
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2006
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
It is an M6 - forgot to add that.
Lift wise - it is a lot of lift. I would use the best springs I can find. Not sure if going from .600 to .650 lift is a huge deal. I know .650 is in the middle of the range according to David Vizard, based on valve size.
Thanks, I'm open to all ideas.
Lift wise - it is a lot of lift. I would use the best springs I can find. Not sure if going from .600 to .650 lift is a huge deal. I know .650 is in the middle of the range according to David Vizard, based on valve size.
Thanks, I'm open to all ideas.
#9
LS1 Tech Administrator
iTrader: (14)
Great cam if you advance it 2 degrees.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
#10
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2006
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Patrick G
Great cam if you advance it 2 degrees.
By the way, once I get this figured out, I will be ordering from Thunder and will let them know about the help I received from this board. Thanks.
Last edited by NoMoreFWD; 01-20-2007 at 03:19 PM.