Good body shop in Manchester, NH
#1
TECH Resident
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Good body shop in Manchester, NH
https://ls1tech.com/forums/paint-body-work/668147-alright-guys-need-ya.html
found the kid who hit me and I need to get it fixed now
Does anyone know of a good place that has quality work and'll be able to get it done right in manchester/hooksett NH, 03106 ?
found the kid who hit me and I need to get it fixed now
Does anyone know of a good place that has quality work and'll be able to get it done right in manchester/hooksett NH, 03106 ?
#2
On The Tree
iTrader: (4)
Join Date: Jul 2004
Location: North Shore
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Henry's Autobody, Manchester, NH
Dont know much about their work. They have a cruise night on saturday's and their shop is HUGE. From what I could see inside the shop, looks like they did really nice work.
Dont know much about their work. They have a cruise night on saturday's and their shop is HUGE. From what I could see inside the shop, looks like they did really nice work.
#6
BMW ///M Nerd
iTrader: (5)
I'm from Nashua. My good friend owns Amherst Street Collision and Custom down here. About a 15 minute drive from you.
http://profile.myspace.com/index.cfm...endid=57829253
Check them out. Let me know if you need anything else. 883-5900, Awesome guys over there, Todd is the owner. He will take care of you 100%!!!
Robbie
EDIT: Just wanted to throw this in there... Not sure what Todd can do for the quarter panel. But the cost of the right side quarter panel is like $579 on year one.
http://yearone.com/serverfiles/fbshopmain2.asp?cat=G (not a direct link) You have to go to body, then quarter panels/ floorpans.
So all those guys flapping their gums in your other thread about it being under $500 bucks are wrong.
Call him, or go down and get the estimate next week.
http://profile.myspace.com/index.cfm...endid=57829253
Check them out. Let me know if you need anything else. 883-5900, Awesome guys over there, Todd is the owner. He will take care of you 100%!!!
Robbie
EDIT: Just wanted to throw this in there... Not sure what Todd can do for the quarter panel. But the cost of the right side quarter panel is like $579 on year one.
http://yearone.com/serverfiles/fbshopmain2.asp?cat=G (not a direct link) You have to go to body, then quarter panels/ floorpans.
So all those guys flapping their gums in your other thread about it being under $500 bucks are wrong.
Call him, or go down and get the estimate next week.
Last edited by BAD ASS TA WS6; 03-03-2007 at 11:40 AM.
Trending Topics
#9
BMW ///M Nerd
iTrader: (5)
Originally Posted by Dimitri-
Just checked mapquest, that is actually a bit further. Its like 30minutes and ive to go through a few tolls to get there lol
If you really don't want to travel that far, McDowells Auto body in Manchester is the only other place I'd recommend.
#11
BMW ///M Nerd
iTrader: (5)
No not sure. Seriously though drive down to exit 7. You get off, and loop around @ Burger King and go bakc towards the highway. Amsherst St. Auto Body is on the right. It will take you no more than 20 minutes doing like 55.
I don't think McDowells has a website. Look it up in your phone book.
I don't think McDowells has a website. Look it up in your phone book.
#12
TECH Resident
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Just got back from the amherst place.. 845$ lol
BUT GOOD NEWS
found the d-bag that did it, got his insurance and **** already but i still only have liability, he might either pay in cash or go through ins.
never been in an accident, i h8 insurance crap
BUT GOOD NEWS
found the d-bag that did it, got his insurance and **** already but i still only have liability, he might either pay in cash or go through ins.
never been in an accident, i h8 insurance crap
#13
BMW ///M Nerd
iTrader: (5)
Yeah, agreed. Insurance companies BLOW. I'm glad you found him though, you're lucky! It was parked when he hit it though right?
All those guys who said it would be under 500 bucks in that other thread, I just laughed at. A new factory quarter panel is over 500 alone LOL. And you DON'T want the cheap overseas sheetmetal.
Todds a good guy though. He'll take care of you.
EDIT: I just went back and read that other thread. Not sure how throughly Todd checked it out. But did you mention the rear end feeling different?
I'm sure you would know if it was really bad. But if you need me to take a look at it up on the lift, I can probably do it some time. I can't tell from the pics how hard he hit, or if it even hit the tire, so let me now.
All those guys who said it would be under 500 bucks in that other thread, I just laughed at. A new factory quarter panel is over 500 alone LOL. And you DON'T want the cheap overseas sheetmetal.
Todds a good guy though. He'll take care of you.
EDIT: I just went back and read that other thread. Not sure how throughly Todd checked it out. But did you mention the rear end feeling different?
I'm sure you would know if it was really bad. But if you need me to take a look at it up on the lift, I can probably do it some time. I can't tell from the pics how hard he hit, or if it even hit the tire, so let me now.
#14
TECH Resident
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Well actually on the estimate sheet Chris printed out (Todd was out for like 30mins when I got there) it says sheet metal on there w/ a price of 499.. the rest is replenishing and repainting..
It was parked yea. I havent felt anything major difference feeling. It could be just me thinking its worse than it is. I dont think it is though because the lower piece of of the bumper was not damaged.
It was parked yea. I havent felt anything major difference feeling. It could be just me thinking its worse than it is. I dont think it is though because the lower piece of of the bumper was not damaged.
#15
TECH Resident
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
I was actually thinking about buying the panel on ebay... there is a green one good condition for 125 + shipping... I dont think a shop would like to install a piece that i have though..
#16
BMW ///M Nerd
iTrader: (5)
Originally Posted by Dimitri-
Well actually on the estimate sheet Chris printed out (Todd was out for like 30mins when I got there) it says sheet metal on there w/ a price of 499.. the rest is replenishing and repainting..
It was parked yea. I havent felt anything major difference feeling. It could be just me thinking its worse than it is. I dont think it is though because the lower piece of of the bumper was not damaged.
It was parked yea. I havent felt anything major difference feeling. It could be just me thinking its worse than it is. I dont think it is though because the lower piece of of the bumper was not damaged.
I work on BMWs. But if a customer supplies his own parts, it's all good. The labor rate just goes up a little bit.
Rob
#17
TECH Resident
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: NY
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
YES I just called the dbags parents cause he was trying to procrastinate and **** me over. His dad is sending me a check for 845.10 for the fix.
haha i was trying to think if i could make money off buying a used panel and getting todd to install and paint, but i just called and he said he cant install a new panel cause he would have to cut both and since its weld on itd be like twice the hours. If it was bolt on it would be np tho.
Was a good idea tho
THANK YOU for your help. I will def get new pics of after the fix. I hope itll look just as good as before =O
haha i was trying to think if i could make money off buying a used panel and getting todd to install and paint, but i just called and he said he cant install a new panel cause he would have to cut both and since its weld on itd be like twice the hours. If it was bolt on it would be np tho.
Was a good idea tho
THANK YOU for your help. I will def get new pics of after the fix. I hope itll look just as good as before =O