Need a shop to build my car....
#1
TECH Enthusiast
Thread Starter
Need a shop to build my car....
where do u guys here in SOCAL get your cars done?? I was gonna go to
AA Corvette in Oxnard, but i emailed them and they emailed me back saying they dont work on fbods, even though there website says they work on any LS1 powered cars. I need a place to get the car build and dyno tuned, i basically have three cities i can go....SAN DIEGO/LA/PHOENIX. help me out guys.
AA Corvette in Oxnard, but i emailed them and they emailed me back saying they dont work on fbods, even though there website says they work on any LS1 powered cars. I need a place to get the car build and dyno tuned, i basically have three cities i can go....SAN DIEGO/LA/PHOENIX. help me out guys.
#2
TECH Fanatic
iTrader: (2)
Join Date: Sep 2004
Location: Kalifornia
Posts: 1,138
Likes: 0
Received 0 Likes
on
0 Posts
What are you looking to do....
I see you have 15k for mods but what do YOU want.
The reason Andy won't work on F-body's is because of the "garage" mechanic reputation. He doesn't want to spend hours trying to "fix" a car before he can start to actually get some performance out of it.
I see you have 15k for mods but what do YOU want.
The reason Andy won't work on F-body's is because of the "garage" mechanic reputation. He doesn't want to spend hours trying to "fix" a car before he can start to actually get some performance out of it.
#6
TECH Enthusiast
Thread Starter
thanks guys....ill take a look into haddad.
JUICED....im gonna go with the ATI setup, but i want h/c, so might as well forge the bitch and avoid future problems. ive been talking to ANDY by email, maybe he can guide me thru the build, but i still rather have a shop do everything.
JUICED....im gonna go with the ATI setup, but i want h/c, so might as well forge the bitch and avoid future problems. ive been talking to ANDY by email, maybe he can guide me thru the build, but i still rather have a shop do everything.
#7
TECH Fanatic
iTrader: (2)
Join Date: Sep 2004
Location: Kalifornia
Posts: 1,138
Likes: 0
Received 0 Likes
on
0 Posts
intercooled 347 D1 with the sdpc pulleys is all you need. You can get away with a stock 02-04 zo6 cam and ls2 heads. an use the money you saved on a rear axle.
Andy is a good guy, talk to Rob at Strictly Performance (rob55 on here) he has alot of experience with ATI setups.
Andy is a good guy, talk to Rob at Strictly Performance (rob55 on here) he has alot of experience with ATI setups.
Trending Topics
#9
TECH Enthusiast
Thread Starter
lol.....thats what i started with.....about half of that is gone now.
JUICED_ id like to be in the +600rwhp but not with a huge cam. i liked what i saw on hptv with lsgun, they made 580 i think. so i dont see why i cant reach my goal with some better parts.
JUICED_ id like to be in the +600rwhp but not with a huge cam. i liked what i saw on hptv with lsgun, they made 580 i think. so i dont see why i cant reach my goal with some better parts.
#10
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
Well Strictly Performance Motorsports is where I say to take it.....I may be slightly bias tho!
He's in Van Nuys also so he's not far.
If you ever read GM-HighTech you'll always see one of Rob's cars in there at some point in time. He actually has a few go'n in there in a month! Whats good for GMHighTech is sure as hell good enough for any of us!......Actually ,...I have the article he was in when he was adding AFR's Mongoose heads on a Vette sit'n right in front of me at my desk!
He's in Van Nuys also so he's not far.
If you ever read GM-HighTech you'll always see one of Rob's cars in there at some point in time. He actually has a few go'n in there in a month! Whats good for GMHighTech is sure as hell good enough for any of us!......Actually ,...I have the article he was in when he was adding AFR's Mongoose heads on a Vette sit'n right in front of me at my desk!
Last edited by WS6 Rampage; 04-25-2007 at 02:21 PM.
#11
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
Originally Posted by Juiced
....talk to Rob at Strictly Performance (rob55 on here) he has alot of experience with ATI setups.
#12
Banned
iTrader: (1)
Join Date: Jul 2006
Location: GARDENA
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
i wouldnt take it there, haddad will be the best choice but again everyone has there own opinion
Originally Posted by WS6 Rampage
Well Strictly Performance Motorsports is where I say to take it.....I may be slightly bias tho!
He's in Van Nuys also so he's not far.
If you ever read GM-HighTech you'll always see one of Rob's cars in there at some point in time. He actually has a few go'n in there in a month! Whats good for GMHighTech is sure as hell good enough for any of us!
He's in Van Nuys also so he's not far.
If you ever read GM-HighTech you'll always see one of Rob's cars in there at some point in time. He actually has a few go'n in there in a month! Whats good for GMHighTech is sure as hell good enough for any of us!
#13
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
Originally Posted by SVT BAIT
i wouldnt take it there, haddad will be the best choice but again everyone has there own opinion
#14
I would take it to strictly but just be prepared to keep it there a while.I just went recently and he works on some badass cars.There was a TT set up for a GTO making 900 hp.Rob works on practically LS1/LS6/LS7/LS2. Whats up Rampage we met when I took my car to put the intake on.I feel the difference from a 4000 rpm.
#15
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
Originally Posted by BurtReynolds
I would take it to strictly but just be prepared to keep it there a while.I just went recently and he works on some badass cars.There was a TT set up for a GTO making 900 hp.Rob works on practically LS1/LS6/LS7/LS2. Whats up Rampage we met when I took my car to put the intake on.I feel the difference from a 4000 rpm.
That cars finished now!....It had some issues before it came in that Rob was try'n to track down before he released it with a now Twin Turbo setup on it. Thats why it took awhile. Hey,...didn't you also have Rob do a cam swap for you also?
#16
Banned
iTrader: (1)
Join Date: Jul 2006
Location: GARDENA
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
i rather not put his business out there, u know
Originally Posted by WS6 Rampage
And why shouldn't he take it to Strictly?!!....I wanna hear this. Oh and BTW,...Haddad Motorsports still never answered Strictly's challenge!....
#17
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
No I don't know!...Maybe you should explain...
..Did he work on your car and it blew up on you?
Have you even been to the shop?
Have you ever even spoken to Rob?
Do you work for OR are friends with one of his competitors?
Or..... Did someone say something bad about him and your just perpetuating it by tell'n everyone "Don't take it there....this and that will happen?"....
....please.....explain because he does pump out some of the fastest LS powered vehicals out there so I'd just love to hear why someone would say NOT to take it there!
..Did he work on your car and it blew up on you?
Have you even been to the shop?
Have you ever even spoken to Rob?
Do you work for OR are friends with one of his competitors?
Or..... Did someone say something bad about him and your just perpetuating it by tell'n everyone "Don't take it there....this and that will happen?"....
....please.....explain because he does pump out some of the fastest LS powered vehicals out there so I'd just love to hear why someone would say NOT to take it there!
#18
Banned
iTrader: (1)
Join Date: Jul 2006
Location: GARDENA
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
none of the above ...im not saying nothing!
Originally Posted by WS6 Rampage
No I don't know!...Maybe you should explain...
..Did he work on your car and it blew up on you?
Have you even been to the shop?
Have you ever even spoken to Rob?
Do you work for OR are friends with one of his competitors?
Or..... Did someone say something bad about him and your just perpetuating it by tell'n everyone "Don't take it there....this and that will happen?"....
....please.....explain because he does pump out some of the fastest LS powered vehicals out there so I'd just love to hear why someone would say NOT to take it there!
..Did he work on your car and it blew up on you?
Have you even been to the shop?
Have you ever even spoken to Rob?
Do you work for OR are friends with one of his competitors?
Or..... Did someone say something bad about him and your just perpetuating it by tell'n everyone "Don't take it there....this and that will happen?"....
....please.....explain because he does pump out some of the fastest LS powered vehicals out there so I'd just love to hear why someone would say NOT to take it there!
#20
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: The dirty taint of the country. ...Los Angeles
Posts: 2,498
Likes: 0
Received 3 Likes
on
2 Posts
Originally Posted by SVT BAIT
none of the above ...im not saying nothing!
Last edited by WS6 Rampage; 04-25-2007 at 04:29 PM.