ClemsonT/A

iTrader: (2)

I am getting ready to install my LS6 intake (it finally got back from the paint shop) and I was reading over the install guide. The I have everything listed on the guide, but it makes no mention of any gaskets. So my question:

What, if any, gaskets (part numbers would be great if you have them) do I need to install the intake?

Thanks in advance.

radkon

iTrader: (2)

You should be able to reuse the gaskets from your LS1 intake. If you are dead set on replacing them, many folks prefer the FAST gaskets as they are a bit beefier.

Bad Blue WS6

iTrader: (41)

my new intake (SLP LS6) came with gaskets already installed on the 8 ports,,,no others needed. Also came with all the nessacary coolant lines.

ClemsonT/A

iTrader: (2)

ok. The intake i have has the gaskets in it, but itis used and it has been sitting for a year. Do you think these would be fine or should i pull the ones off the ls1?

staringback05

iTrader: (8)

are they the red ones or gray ones? are they cracked or damaged?.....

1998LS1SS

iTrader: (8)

my intake came with the grey ones...are they ok?

staringback05

iTrader: (8)

they arent as good as the red ones....i mean their ok...but the red ones stick out from the manifold openings letting them create a tighter seal when compressed...the gray ones are kinda flush as you can see...

Bad Blue WS6

iTrader: (41)

exactly correct,,,my LS1 grays were not as "meaty" looking as my LS6 reds.

1998LS1SS

iTrader: (8)

so if they are bad will i hear a leak? effect performance if no leak?

Ceissus

iTrader: (4)

i have the same question!

new gaskets are like 100 bucks....bleh

bczee

iTrader: (12)

you can get a FelPro (MS92438) set for about $30 at most parts start (autozone, kragnes) or any of the HighPro shops. some of the Sponser will also carry them.

Soul TKR

iTrader: (4)

speed inc has em... click the link and scroll down to the bottom...

http://www.ls1speed.com/catagory.cfm?catagory=Induction

Ceissus

iTrader: (4)

excellent!

Thanks fellas

ClemsonT/A

iTrader: (2)

thanks for all your help guys. The intake is going on Sunday (as well as LCAs and Relocation brackets) and the dynotune Monday.. this is going to be a great weekend

I'm hoping for something in the 345 - 350 range with mods in sig..