"Check Engine" light normal after Cam install?
#1
Launching!
Thread Starter
Join Date: Aug 2004
Location: British Columbia, Canada
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
"Check Engine" light normal after Cam install?
Just got my cam install done. Car drives fine, I have unhooked the battery and re-hooked it back up. Still a light.
List of work done.
-Heads taken off, "decked" (or made flat), intake ports "cleaned", exhaust ports opened up quite a bit.
-New 224/224 .563 112LSA TR Cam/springs/pushrods.
-New Underdrive Crank Pulley with new belts.
-Exhaust system was taken off and then put back on.
I am going for a re-dyno tune shortly (already have a LS1 Edit tune on). Will this fix things up?
Thx for any insight.
List of work done.
-Heads taken off, "decked" (or made flat), intake ports "cleaned", exhaust ports opened up quite a bit.
-New 224/224 .563 112LSA TR Cam/springs/pushrods.
-New Underdrive Crank Pulley with new belts.
-Exhaust system was taken off and then put back on.
I am going for a re-dyno tune shortly (already have a LS1 Edit tune on). Will this fix things up?
Thx for any insight.