Is anyone runnin KY turbo system or Ohio forced
#1
8 Second Club
Thread Starter
iTrader: (11)
Join Date: Jul 2005
Location: nj
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
Is anyone runnin KY turbo system or Ohio forced
Hey guys wanted to know if anyone is runnin either of theses kits?
Going to change over to a turbo kit this winter want to know if anyone is using either of these two kits and what kind of power there making.
Thanks guys
Going to change over to a turbo kit this winter want to know if anyone is using either of these two kits and what kind of power there making.
Thanks guys
#6
TECH Regular
iTrader: (11)
Josh at kentucky turbo also builds an exellent kit also,his kit is based on truck manifolds and can't keep the air cond., if that matters to you.Its a very good kit for a good price.He is currently working on a kit that keeps the air but not availible yet.He is a great guy to work with also and will try to make you happy with your setup.
Trending Topics
#8
My old shop car went:
New Owner
6.09 @ 114 in the 1/8 on 15lbs. Left at 10lbs.
Made 740rwhp and 760rwtq
I went 10.71 @ 133mph in the 1/4 one a 8lbs run leaving on 0 boost. I never turned it up past that. I saw 561 rwhp and 564 rwtq on 10lbs.
This was all done on 325/50 MT Drag Radials, TC76MPS, 370 iron block engine, LQ9 heads. TH400, Yank SC3000 verter, and a 9 inch with 3.25 gears.
The car is easily capable of some mid to low 9's in the 1/4 on 15lbs.
Feel free to give me a call.
New Owner
6.09 @ 114 in the 1/8 on 15lbs. Left at 10lbs.
Made 740rwhp and 760rwtq
I went 10.71 @ 133mph in the 1/4 one a 8lbs run leaving on 0 boost. I never turned it up past that. I saw 561 rwhp and 564 rwtq on 10lbs.
This was all done on 325/50 MT Drag Radials, TC76MPS, 370 iron block engine, LQ9 heads. TH400, Yank SC3000 verter, and a 9 inch with 3.25 gears.
The car is easily capable of some mid to low 9's in the 1/4 on 15lbs.
Feel free to give me a call.
#10
On The Tree
iTrader: (4)
Join Date: Aug 2003
Location: State of Kuwait
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
KY truck manifold kit here .. i just cant wait till we install it on my friend`s camaro
kit looks great, excellent welding, it really worth evry penny
Josh is great guy to deal with.. he can answer all your quistions feel free to call him
Fahad
kit looks great, excellent welding, it really worth evry penny
Josh is great guy to deal with.. he can answer all your quistions feel free to call him
Fahad
#13
#16
TECH Enthusiast
iTrader: (5)
Join Date: Sep 2003
Location: Henderson, KY
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
Chiming in for a KYTP twin setup here! My car is under the knife right now in Josh's shop! You won't find a better person to deal with than Josh! He goes way above and beyond to answer any questions I may have, even during a hectic 70 hour work week! His work is top notch, you wont regret it.
#17
#20