Patriot Heads - any dyno/track numbers yet?
#1
TECH Apprentice
Thread Starter
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Patriot Heads - any dyno/track numbers yet?
Been seeing these talked about alot with promises of posted dyno numbers and track times. I did a search and couldnt find anything with some hard numbers.
Anyone know anything yet?
Thanks.
Anyone know anything yet?
Thanks.
#2
TECH Junkie
Join Date: Dec 2001
Location: Lakeland, FL
Posts: 3,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patriot Heads - any dyno/track numbers yet?
A guy named gomer just had a post with dyno #'s, he did pretty good with a small cam and not cutout etc,, search on his name and you'll find it, I cant remember the exact numbers.
#4
11 Second Club
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patriot Heads - any dyno/track numbers yet?
My dyno numbers are in the sig.. I have been back to the dyno since that thread for a "dyno day" and it was up to 403rwhp. I was going to go to the track sunday.. but I killed the rear saturday night.
#6
TECH Apprentice
Join Date: Jan 2002
Location: Orlando
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patriot Heads - any dyno/track numbers yet?
my dad got 389.1 with the stage 2 patriots and tr224 camin a c5 m6. through stock cats, longtubes, pulley, varam and borla stinger, ls6 intake. stockk throttle body and bridge as well. dyno tuned. a little lower than i would have expected but the dyno he had it tuned on seems to run a little low anyways highest they have ever gotten out of a stage 2 heads cam package was 416hp. they tuned it as well and they are a little new to tuning so that could be part of the low numbers not to mention they said they went conservative on the tune since it is strictly a street car and my dad cared about streetability more than every ounce of power
#7
LS1Tech Premium Sponsor
iTrader: (4)
Re: Patriot Heads - any dyno/track numbers yet?
What headers did he make those pulls with? The stock cats are probably a pretty big restriction at this point, does he have the ability to pull the cats?
Jason
Jason
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Trending Topics
#8
TECH Apprentice
Join Date: Jan 2002
Location: Orlando
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Re: Patriot Heads - any dyno/track numbers yet?
i tried to get him to go with offroads or at least high flows but he didnt want the noise of offroads and didnt want to spend the extra money of high flows.
what do you think offroads or high flows would be worth?
I may have him talked into qtecs in front of the stock cats so we can dyno it with thos open and see what he gets.
what do you think offroads or high flows would be worth?
I may have him talked into qtecs in front of the stock cats so we can dyno it with thos open and see what he gets.