18" z06 rims
#1
TECH Fanatic
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Charlotte, NC / Ansonia,CT
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
18" z06 rims
01 WS6, 18x 10.5 rear 305/35/18 555r
front 18x9.5 285/35/18 555
i took a hammer to the inside well in the rear where i could see it was rubbing, i also had to remove the bump stop and hit that down with a hammer. if someone sits in my back seat it rubs horribly still, and when i take sharp corners/hit a bump i hear it rub really bad. what can i do, i was told not to use a spacer because it can shear the studs. so what can i do
front 18x9.5 285/35/18 555
i took a hammer to the inside well in the rear where i could see it was rubbing, i also had to remove the bump stop and hit that down with a hammer. if someone sits in my back seat it rubs horribly still, and when i take sharp corners/hit a bump i hear it rub really bad. what can i do, i was told not to use a spacer because it can shear the studs. so what can i do
#5
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
Hit it more with the hammer. Next time My wheels come off i will fit it off with the plasma cutter or just out a spacer on it Also running a small spacer wont hurt anything! I ran them for years on my old wheels and took it up over 140-160 many many times and on road trips of over 2,000 miles cruising 80-90mph
Trending Topics
#9
TECH Fanatic
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Charlotte, NC / Ansonia,CT
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
i havent rolled the fender yet, but i seen on the inside of the well where it was rubbing and the 5#er went back at it doesnt seem to rub anymore, but i do notice if i hit a bump it hits my fender