Iwant2beArealBoy

Hey guys don't know much about auto trans. Just wounding what size you guys think i should use

LT1-DAN

I have a Vig.3200, and I think it's perfect for a dd.

Iwant2beArealBoy

ok thanks

HotWS6

I have a 3600, drives great for street driving

TXZ28LS1

iTrader: (5)

im running a vig 3200!! good all around stall and happy with it.. definitely cant go wrong with a vig 3200 or yank SS3600.

Circle-D

iTrader: (21)

I would recommend something just above 3000 as well. I have a "2C" that is perfect for a DD and still gives great performance. What is your read end ratio?

Chris

RedRallyeZ

iTrader: (20)

yankss3500 w/ 3.73's work good for me

CamaroRacing12

iTrader: (5)

x2!!!

98_Formula

iTrader: (15)

i have a 4000 stall and with my stock 2.73 gears out back and i love it. some might say its too high of a stall for a DD but i've never felt that way.

Muerte_X

iTrader: (1)

Werd, I have a 4400 with 3.23's, so it probably feels like yours does. I love it.

I'm sure it's not for everyone though, I'd go with a 3800, with the 3800 I had before (2.5STR) you could hardly tell it wasn't stock, at least until your went WOT.

Mr. Brett

iTrader: (13)

I've got a 3500 w/3.73's and it's totally streetable. I've actually been considering going bigger. All converters are different, though. It all depends on how it was built, STR, etc.

SOMbitch

iTrader: (8)

The Yank SS series will drive nearly as tight as stock but hits hard with a 2.5 STR. Yank builds an efficient converter also.

RevGTO

iTrader: (12)

Depends on how you use your car. Is it just around town or are you going to take it to the track?

kevin's_00ss

TCI SSF4000 here makes a great DD drive like stock but when you hit it.....

Figz Z28

iTrader: (8)

Yanks SS4000 4.10's

RoDan

3500vig 3.23's. love it.