maxgee

iTrader: (5)

I'm following recommended procedures to remove KR but no luck. I remove from one area and another area is affected, but not all the time. I know of all the obvious sources of KR, bad gas, hot air and high backpressure.
Any other reason for KR? I have hptuners and left my sensitivity as is, could poly motor mounts contribute to false knock?

SuperZ

iTrader: (2)

My sensitivity had to be turned down and now no problems!

BJC51984

iTrader: (60)

How do you go about turning down the knock sensor sensitivity? I have HPTuners and would like to do this.

maxgee

iTrader: (5)

go to engine>spark control>knock sensors

gametech

iTrader: (1)

Have you done a blanket timing pull to verify that it is real knock? Just doing individual cells won't give a definitive answer, as the KR often shows up in a cell near the actual offender if it IS real knock.

maxgee

iTrader: (5)

I will try that and see what happens.
thanks

firehawk123

whats mode you have on the car .

maxgee

iTrader: (5)

Intercooled Single Turbo with 7.8 wastegate spring.