BoostBandit

iTrader: (1)

Looking for a FMIC for STS system on a Trans Am. I tried to look at Texas rear mount but their website seems to be down or something. Thanks!

Rickys S/C Z28

iTrader: (13)

i think the inter cooler would be just like any other one but the piping would be what is different?

BoostBandit

iTrader: (1)

yeah but I was hoping to get the piping too. That is the hard part

Silver_TransAm

iTrader: (2)

I got one of ebay that came with lots of 2.5inch piping, silicon couplers, t-bolt clamps, and a blow off valve. The intercooler is 31x12x3 and has 3inch in and 3inch outlet. Only cost me 250.oo. It was all brand new stuff u just got to look. Many people are using this same intercooler with no probs. The brand is cxracing.

BoostBandit

iTrader: (1)

What pipes, length and how many will I need if you dont mind me asking

Mr.MartyStone

iTrader: (12)

TRT went under for screwing people over. Check around on Turbomustangs...there are VERY good deals on cheaper intercoolers.

Silver_TransAm

iTrader: (2)

Silver_TransAm

iTrader: (2)

This is how I ran mine on my sts kit.












Hope some of that helps.

witry

iTrader: (8)

how much did you have to cut the front bumper to get FMIC to fit without having to cut the brace...... you have anymore pics of the whole front end?

Silver_TransAm

iTrader: (2)

I had to cut off a lot of the fog light hole that is recessed and also about 4inches off the very bottom where it curves up underneath.




I dont have any of the underside that is cut.

witry

iTrader: (8)

that looks really clean i love the fact that you didnt cut the bumper brace, did you have to cut alot of the plastic bumper to make it fit good?

Silver_TransAm

iTrader: (2)

Thanks.

Yeah i did not want to cut the support at all so I tryed a different way; dont know if anyone else has done it like I did.

You just have to trim a couple of inches off the bottom of the bumper up underneath and the fog light holes. I used a sawzall and marker and kept trimming it till it fit. u have to get rid of the foam support behind the bumber and thats it. I took me about 6hrs to complete it. I is deffinetly doable. It still is pretty sturdy even though there is only a couple of bolts and some snaps holding it on. No probs yet.

RooRnZ28

iTrader: (14)

silver transam, that looks really good! kinda makes me wish i would have just bought one of those kits off ebay. Those damn pipes can be expensive by themselves!!

witry

iTrader: (8)

thanks alot im going to do my FMIC next weekend on my trans am and you just helped me out alot thanks bro

Silver_TransAm

iTrader: (2)

Ebay suprised me too.

WITRY-- Your welcome just let me know if you need to know anything else. Good luck.

fenix999

iTrader: (17)

I have a front mount intercooler setup for sale. It includes 3" pipes mandrel bent going up through the fuse box area and all the 4-5ply reinforced silicone hoses, heavy duty t-bolt clamps, and a 31"x12"x3" intercooler. It includes everything all the way to the throttle body and is meant for guys running their MassAirFlow sensor as well...Pm me if you want more info and pics...

whitelt1ta

iTrader: (21)

i am interested in pics and a price for the fmic set up. benlt1transam@yahoo.com please email me pics.

BoostBandit

iTrader: (1)

Well I ordered my kit I got the same exact kit that Silver TransAm has. Thanks for all the help Silver.

Silver_TransAm

iTrader: (2)

No prob buddy, keep us updated.