camaro468

iTrader: (6)

got a clicking in the front end only win truning right or left every thing sems tight cant figure it out trying to pin point it not wanting to just start replaceing parts any ideas ?

Major_Lee_Slow

iTrader: (1)

I had the same issue, but only when backing up and turning left. Turns out my 17x11's with 315's on the front would catch the inside of the fender lip on the front edge

I don't suppose you are running 315's up front are you? You may want to jack the car up take the tire off and look for rub marks. What have you done so far to trouble shoot the issue?

WayneSS01

You need a new hub assembly for that wheel.

camaro468

iTrader: (6)

i am running 275s in the front i checked the tie rods ball joints for play

camaro468

iTrader: (6)

does it whin i trun both ways your saying both sides are bad ?

Major_Lee_Slow

iTrader: (1)

Jack the car up and grab the tire in the 12:00 and 6:00 position. Then try to rock the tire in and out. If it doesn't move, then you probably do not need new hubs.

camaro468

iTrader: (6)

i am tinking it is in the rack couse you can feel it in the streeing wheel whin it does it i might be wrong though ill check what ya said too

twitchtwice

iTrader: (12)

makes sure you torqued all your wheels lug nuts to 100ftlbs

ryanater

iTrader: (2)

Easy... Your CV axle is going out

camaro468

iTrader: (6)

dude are u kidden its a camaro ?

WayneSS01

My right front clicked when turning left. The faster it rotated the faster the click. Replaced the right front hub. No more clicking.

defcon(ls)1

iTrader: (1)

I get a click under this circumstance:

1) I reverse out of my parking spot
2) I put into Drive and go forward.
3) The first time I hit the brakes, I hear a "click" (from the driver's side)

It doesn't happen afterwards until I repeat Step #1 and #2

Any more ideas???