First race with my Nova-62
09-22-2008, 08:37 AM
#1
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
First race with my Nova-62 This weekend i tested my Nova with LS engine for the first time.
6.0 lit
Stock crank
Stock heads with 2.05/1.6" valves
TSP Giant cam with 115 lobe
S480 turbo
E85
15 psi boost
And i ran 8.53@160 mph with 1.27 60-feet.
Here is the vid: http://www.youtube.com/watch?v=eLQwlaKwNxo
Itīs the blue nova.
Looking forward to some 7 sec runs next year
6.0 lit
Stock crank
Stock heads with 2.05/1.6" valves
TSP Giant cam with 115 lobe
S480 turbo
E85
15 psi boost
And i ran 8.53@160 mph with 1.27 60-feet.
Here is the vid: http://www.youtube.com/watch?v=eLQwlaKwNxo
Itīs the blue nova.
Looking forward to some 7 sec runs next year
09-22-2008, 08:39 AM
#2
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
09-22-2008, 09:23 AM
#4
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
I think itīs 2700 lbs.
The problem was the converter, no more trapspeed even if i boosted 20 psi.
Iīm going to dyno it in a engine dyna and order a custom converter for next year. I think iīm going to upgrade to a 4" crank also..
Ecu is a Vipec V88. www.vi-pec.com
The problem was the converter, no more trapspeed even if i boosted 20 psi.
Iīm going to dyno it in a engine dyna and order a custom converter for next year. I think iīm going to upgrade to a 4" crank also..
Ecu is a Vipec V88. www.vi-pec.com
09-22-2008, 12:31 PM
#5
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
09-22-2008, 02:01 PM
#9
On The Tree
Join Date: Aug 2007
Location: Finland
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Great work dear neighbour (I'm from Finland)! I'm full of questions cause having also plans for my 6.0 and S480 and everything...
How high is compression ratio?
Which injectors?
Which pistons and rods?
How much your heads flow? I assume they are ported 317s?
What's your trans?
Great work again !!!
How high is compression ratio?
Which injectors?
Which pistons and rods?
How much your heads flow? I assume they are ported 317s?
What's your trans?
Great work again !!!
09-22-2008, 02:53 PM
#10
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
9.2 CR
Wiseco pistons with tool pin upgrade
Eagle rods with L19 upgrade
160lb injectors
I donīt know flow. They are only very mild ported.
TH400 tranny.
90% injector flow at 20 psi.
So itīs well over 1000hp, but my converter didnīt like it
Wiseco pistons with tool pin upgrade
Eagle rods with L19 upgrade
160lb injectors
I donīt know flow. They are only very mild ported.
TH400 tranny.
90% injector flow at 20 psi.
So itīs well over 1000hp, but my converter didnīt like it
09-23-2008, 03:31 PM
#11
TECH Regular
Thread Starter
Join Date: Aug 2007
Location: Sweden
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
