Gm 847?
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2005
Location: albuquerque,new mexico
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Gm 847?
i was thinking about upgrading my cam from my current LT4 hotcam to something a lil bite bigger and better ......... now i have been researching the GM 12370847(gm 847) and was wondering what kind of power gains i would be seeing........ i am also open for suggestions on other cams......
#6
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2005
Location: albuquerque,new mexico
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slowmofo
good cam, ran it in my old 94. But I would look around before you decide
i was wondering what kimd of times you were pulling off........?
#7
11 Second Club
iTrader: (6)
Originally Posted by FbodyFreak
i was wondering what kimd of times you were pulling off........?
Sold the car, and the kid who bought it wants to put a 6spd in it. I think it could have run mid 12's with stock heads. Have to have good heads to really get full use of that cam. Guys with smaller cams are running faster with stock heads.
I got the cam for free, only reason I used it. And I planned on some LE3's for it. Just never happen
Ellis ran high 11 with stock castings..He was my insperation
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (5)
Join Date: Jul 2005
Location: albuquerque,new mexico
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slowmofo
no clue really.. broke the tranny on its first real pass. 1.73 60' though.
Sold the car, and the kid who bought it wants to put a 6spd in it. I think it could have run mid 12's with stock heads. Have to have good heads to really get full use of that cam. Guys with smaller cams are running faster with stock heads.
I got the cam for free, only reason I used it. And I planned on some LE3's for it. Just never happen
Ellis ran high 11 with stock castings..He was my insperation
Sold the car, and the kid who bought it wants to put a 6spd in it. I think it could have run mid 12's with stock heads. Have to have good heads to really get full use of that cam. Guys with smaller cams are running faster with stock heads.
I got the cam for free, only reason I used it. And I planned on some LE3's for it. Just never happen
Ellis ran high 11 with stock castings..He was my insperation
yeah i was thinking about the LE2 H/C package but...... i heard about the gm 847 so i was thinking about just getting the cam.........
#10
TECH Apprentice
iTrader: (3)
Join Date: Jul 2006
Location: baltimore, md
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
do the le2, you'll make more power. if you dont wana have to buy injectors, etc. then be happy with the 847's high-revving but realize without heads you wont realize a lot of its power.