Formula934

iTrader: (4)

hey guys,

going with the AFR 227's, 396 setup and wondering what headers I need to go with. Ive been doing alot of research and its pointing towards the 1 3/4 to 1 7/8 stepped header. So I know kooks makes that header but is extremly expensive. Just wondering what you guys are running and if theres anything a little less pricey. please post your set up, part numbers, price and/or anything else that would be helpful. Thank you

stroked30th

iTrader: (2)

Hedman has a set of 1 7/8 w/ a 3 1/2 collector. I like mine

Part no. 65387

Tony Shepherd

iTrader: (4)

I am running the Hedman stepped header as well.

stroked30th

iTrader: (2)

That part no. I posted is for the speard port full length 1 7/8 header.

Formula934

iTrader: (4)

Do they have a standard port 1 7/8's hedman header ?

stroked30th

iTrader: (2)

Part no. 65385 looks like they are standard port.
The 65387's came with adapters and hardware to use on a standard port.

Formula934

iTrader: (4)

yea I was just looking at the 65385 headers and they do look like standard port, maybe ill get them a call... I havent ordered the heads yet so maybe ill consider going with the spread port.. Is there any advantage in going with spread port ??

OutlawZ

iTrader: (4)

I run the standard port 1 3/4 stepped to 1 7/8" like tony's as well. Fitment is real nice.....

They are really good quality for the price...

stroked30th

iTrader: (2)

I'm no genious, but I would say unless you're gonna spray it heavy or go FI standard port will be fine.

My AFR's had both standard port bolt holes and Stahl pattern bolt holes; not sure if all AFR's are that way?

Formula934

iTrader: (4)

ok so ill definately be looking into Hedman headers, thanks guys for all the help and hopefully ill have some dyno numbers by spring!!!