5.0stang

iTrader: (1)

Can you guys list some companies that port the heads?

Thanks.

Gun5

iTrader: (37)

sellin my ported ones atm will pm ya

1slowZinthe513

iTrader: (10)

i have only heard good things about Lloyd Elliot's heads

infinitebird

iTrader: (11)

lloyd elliot, advanced induction, portpros are all good choices.

socal

iTrader: (1)

http://gtp-racing.com/
this is my guy he does stuff for the big guy's monster trucks and pro stock stuff ect...

meangreeneyz28

iTrader: (10)

what does loyd charge for a good port job and mill job and how much can you mill I would like to get about 10.5 to 1 on a .40 over stock deck lt1

Camaro_freak

iTrader: (1)

Total Engine Airflow is another LT1 head porter.

J_Z28_T

iTrader: (2)

http://www.eportworks.com/lt1.html

this will have his prices and stuff

TwoFast4Lv

iTrader: (8)

All the names above are good. GTP is one of the older LT1 places from back in the day. Phil's stuff is great as is Port pro's

I my self am running a custom set of LE-X heads from lloyd

BizZzatch350

iTrader: (33)

GTP used to port a lot of shops LT1 heads back in the late 90s, some people made some power with Craig's heads. But nowadays theres so many choices, Thunder still sells GTP LT1 Heads but for the price your better off looking else where. Ellis, remember IRS? They had those Terminator heads, I think a local machine shop was porting them for Dennis.

TwoFast4Lv

iTrader: (8)

Those and the "Peak Perf" heads that were all the rage. . but tended to leak and Hydralic Engines. I made the mistake of letting a guy get a IRS engine. they never balanced it Shook until the day it spit four rods out the side of the block LOL!


There has been alot of them come and go that is for sure.

J_Z28_T

iTrader: (2)

im new to this but i guess it is all pp, i like LE cuz he is 20 mins from my house and im in TX and thats all i know about! Plus i have seen some vids of his cars and they fly!!

speed_demon24

iTrader: (6)

Advanced induction gets my vote. I made 430rwhp with a miss and unported intake with their heads/cam and my stock 100k mile shortblock. Track times are coming soon.

NorthernZ

I'm going down the same route right now. I've been talking to shops from all over North America to get work done to my stock casting LT1 heads (porting and biger valves). I live on the northern west coast of canada and I'm just finding out what I can with a huge help from this web site. So far I've talked to 9 shops and I got a good vibe from three shops:
- Advanced induction, North Carolina.USA
- Pro stock, Edmonton Alberta.Canada
- Canadian Performance, Toronto Ontario.Canada
Do you guys know any thing about these places? Nobody where I live has any info in these cars cause no one runs them. I called Loyd Elliott's a couple times this week and got no answer only the answering machine????

NorthernZ

did my info and pic. work?