Torque Management w/ M6? - LS1TECH

Go Back   LS1TECH > CHASSIS, SUSPENSION, APPEARANCE > Manual Transmission
Sign in using an external account
Register Forgot Password?
Search


Manual Transmission
T56 | T5 | MN12 | Clutches | Hydraulics | Shifters
Sponsored by
McLeod Clutch


Torque Management w/ M6?

Reply
 
Thread Tools Search this Thread
Old 11-06-2002, 03:51 PM   #1
11 Second Club
 
Mr. B's Avatar
 
Trader Rating: 1
Join Date: Feb 2002
Location: NY
Posts: 3,933
Default Torque Management w/ M6?

Is Torque Management a A4 ONLY thing?

Is Torque Management found in a PCM for an M6?
Mr. B is offline   Reply With Quote
Old 11-06-2002, 06:13 PM   #2
TECH Resident
 
Gimp98TNT's Avatar
 
Trader Rating: 21
Join Date: Mar 2002
Location: Bedford ,Ohio
Posts: 855
Default Re: Torque Management w/ M6?

Nope no torque management on an M6

It my be in the pcm but i'm not sure.

<small>[ November 06, 2002, 06:16 PM: Message edited by: Gimp98TNT ]</small>
__________________
1998 CamAro SS A3 www.weberracing.net
Weber Racing 403ci. LS2, Compstar crank, K1 tech/Carillo rods, Wiseco Nitrous pistons. Trickflow 225's, Vengance cam 257/262 .600/.600 112, Vic. Jr. Elbow 90mm TB, NX Perimeter Plate, Nitro Dave's Standalone fuel system.
Rossler TH-400 W/Trans-Brake, 12-bolt W/3.73's 28x10.5x15S ET Drags
Best ET 9.65 @ 138 1.331 60ft. Best 60ft. 1.331 Best MPH 138.78
Gimp98TNT is offline   Reply With Quote
Old 11-07-2002, 01:41 PM   #3
TECH Addict
 
LOnSLO's Avatar
 
Trader Rating: 15
Join Date: Sep 2002
Location: Gainesville, GA
Posts: 2,537
Default Re: Torque Management w/ M6?

TM was set at 350 from the factory in my M6. Set it to 850 when it was dyno tuned. Noticed a little less drop off in power during hard shifts.
__________________
2002 SS 6 Speed
Mods
LOnSLO is offline   Reply With Quote
Old 11-07-2002, 02:06 PM   #4
11 Second Club
 
Mr. B's Avatar
 
Trader Rating: 1
Join Date: Feb 2002
Location: NY
Posts: 3,933
Default Re: Torque Management w/ M6?

I imagine that the 350 value was ft lbs of Torque, correct?
Mr. B is offline   Reply With Quote
Old 11-07-2002, 02:10 PM   #5
TECH Addict
 
LOnSLO's Avatar
 
Trader Rating: 15
Join Date: Sep 2002
Location: Gainesville, GA
Posts: 2,537
Default Re: Torque Management w/ M6?

Yes, 350 ft-lbs. The power always would fall off a bit during high speed shifting. Now, it's ***** to the wall. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
__________________
2002 SS 6 Speed
Mods
LOnSLO is offline   Reply With Quote
Old 11-07-2002, 02:20 PM   #6
Teching In
 
Trader Rating: 11
Join Date: Jan 2002
Location: Rutledge, TN
Posts: 44
Default Re: Torque Management w/ M6?

I have been having the same problem with my M6 on the 1-2 shift. I was thinking it may be a torque management problem. I will get that fixed! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
__________________
2002 Camaro SS
GMRACIN is offline   Reply With Quote
Old 11-08-2002, 12:44 AM   #7
TECH Senior Member
 
Colonel's Avatar
 
Trader Rating: 0
Join Date: Nov 2001
Location: Troy, AL
Posts: 9,245
Default Re: Torque Management w/ M6?

Something damn sure pulls the power WAAAAAAAAAY back on my M6 whenever I powershift 1st or 2nd. I think M6s do have TM.
__________________
Stephen Sanders
2000 422CI Z28
First hydraulic cam Gen III in the 9s NA
BEST RUN:60FT 1.40, 1/8 6.25/110.37, 1/4 9.82/136.84
(It was also the 2nd internally stock in the 11s and the 1st internally stock in the 10s on N2O.)
2002 Z28 A4 3525 lbs, 3.23 gears, TCI 3500 stall, worked LS6 heads/Stealth II cam
Best times-60FT 1.55 (17" Nittos) 1/4 11.20/121.47
Colonel is offline   Reply With Quote
Old 11-08-2002, 11:22 AM   #8
Launching!
 
Trader Rating: 0
Join Date: Aug 2002
Location: Sherwood, AR
Posts: 281
Default Re: Torque Management w/ M6?

Good Info. Thanks!
__________________
1999 FRC Corvette
2011 Mustang GT/CS
jaywoo is offline   Reply With Quote
Old 11-10-2002, 02:11 AM   #9
Launching!
 
Trader Rating: 0
Join Date: Dec 2001
Location: Homestead
Posts: 210
Default Re: Torque Management w/ M6?

what option is it for the M6 in LS1edit?
__________________
2000 Camaro SS,SLP (Ebony/Red MN6)Build #3516
JPR Stage II heads
224 Thunder Cam
JPR Ported MAF
JPR Ported Throttlebody
ASP Crank Pulley
LS6 Intake Manifold
Mac Headers W/ORP
Mcleod REV-LOC II Clutch
430RWHP 419RWTQ
shadowSS is offline   Reply With Quote
Old 11-10-2002, 07:46 AM   #10
11 Second Club
 
StevieZ's Avatar
 
Trader Rating: 3
Join Date: Mar 2002
Location: Montreal
Posts: 1,794
Default Re: Torque Management w/ M6?

Just change max torque from 350ft.lbs.to 1000 ft.lbs.
__________________
1998 Z28 M6/LS6 383 CID Lunati stroker/PP Stage II+heads/ Comp Cams 242/242 .610/.610 113+4* lsa/ARP mains and head studs/ Yella Terra rockers/ LS6 intake/Kooks stainless1 7/8" headers/ 3"X3"ORP/ QTEC cutout/ LS6 PCV/Rollmaster double roller T-chain/Katech oil pump/Spec 3+ /3.73-12 bolt Strange/ASP pulley/ Magnaflow cat back/315 Nittos/K&N + MTI lid/160 Tstat/SLP rad .Other stuff.....
Old heads and cam: 11:47@123.5mph (4400rpm launch)
StevieZ is offline   Reply With Quote
Old 11-10-2002, 02:57 PM   #11
TECH Veteran
 
2001CamaroGuy's Avatar
 
Trader Rating: 5
Join Date: Feb 2002
Location: Fountain Hills, AZ USA
Posts: 4,750
Default Re: Torque Management w/ M6?

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by StevieZ:
<strong>Just change max torque from 350ft.lbs.to 1000 ft.lbs.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">directons please.....I'm ordering LS1Edit tomorrow
__________________
Chris

2003 Maldives Blue Metallic BMW Z4
- 2880lbs (wet weight)
- E46 M3 diff/rear suspension swap
- 427 LS7/T56 swap (in process)
2001CamaroGuy is offline   Reply With Quote
Old 11-10-2002, 02:57 PM
LS1Tech
Pontiac Firebird




Paid Advertisement
Reply


Tags
2000, 350, 98, camaro, ls, ls1tech, ls6, m6, management, manegment, max, speed, ss, t5, torque


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


 

All times are GMT -5. The time now is 10:11 AM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Service - Privacy Statement - Terms of Service - JOBS
Emails & Contact Details