Another Hall's deal!!!
TECH Addict
iTrader: (17)
I knew Jake would be faster. And honestly, past a set of different headers and y-pipe someday, I doubt I'll really do much else (if anything) to the Z. I am content with the car as it is. So, don't know if we will line em up again, as it wouldn't be a close race anymore.
If things work out (don't know if they will right now), theres a chance I might have a Supra shortly after I get back in Indiana, and I'll race anyone who wants a piece
:NOTE:
Races will begin at 100 MPH or higher
If things work out (don't know if they will right now), theres a chance I might have a Supra shortly after I get back in Indiana, and I'll race anyone who wants a piece
:NOTE:
Races will begin at 100 MPH or higher
10 Second Club
iTrader: (4)
Join Date: Mar 2006
Location: Fort Wayne, IN
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Once the "over the winter" tank of gas is used up, I'm in for a run with Kyle's brother. I only got Ben by a little so it should be interesting.
TECH Addict
iTrader: (17)
It kept blowing fuses for the Boost-A-Pump, but I eliminated that when I went to dual pumps. I hoped that cured my dead battery issues, but appearently not.
Once the "over the winter" tank of gas is used up, I'm in for a run with Kyle's brother. I only got Ben by a little so it should be interesting.
Once the "over the winter" tank of gas is used up, I'm in for a run with Kyle's brother. I only got Ben by a little so it should be interesting.
http://videos.streetfire.net/video/B...28s_187925.htm
Either way it was close, and I'm game for another round
TECH Apprentice
iTrader: (16)
Join Date: Feb 2008
Location: Fort Wayne, IN
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Jake how'd the video's of last night turn out?
That Cobra is BRUTALLY fast
Now you're talkin my kind of race
That Cobra is BRUTALLY fast
Now you're talkin my kind of race
TECH Addict
iTrader: (17)
TECH Apprentice
iTrader: (16)
Join Date: Feb 2008
Location: Fort Wayne, IN
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
TECH Enthusiast
iTrader: (3)
Join Date: Feb 2008
Location: Auburn, IN
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Drew and Darren. My wife called trying to get a hold of someone we knew in Ft. Wayne. The fireturd died on us again at the coldwater walmart, we got it restarted and think because it was low on fuel that it died on us when we went around a curve. I fear that I killed another optispark too. It will stumble and then Backfires when accelerating randomly and then it sets the CEL right after the backfire.
TECH Addict
iTrader: (17)
Drew and Darren. My wife called trying to get a hold of someone we knew in Ft. Wayne. The fireturd died on us again at the coldwater walmart, we got it restarted and think because it was low on fuel that it died on us when we went around a curve. I fear that I killed another optispark too. It will stumble and then Backfires when accelerating randomly and then it sets the CEL right after the backfire.
I've gone through more than my fair share of opti's, and it almost always could have been avoided had I known what was really going on. An opti should last an average of 50,000 miles if kept dry. It is easy to point the finger at it when issues happen, but it is not always the culprit.
11 Second Club
iTrader: (34)
Join Date: Feb 2005
Location: Ft. Wayne, Indiana
Posts: 3,158
Likes: 0
Received 0 Likes
on
0 Posts
Drew and Darren. My wife called trying to get a hold of someone we knew in Ft. Wayne. The fireturd died on us again at the coldwater walmart, we got it restarted and think because it was low on fuel that it died on us when we went around a curve. I fear that I killed another optispark too. It will stumble and then Backfires when accelerating randomly and then it sets the CEL right after the backfire.
Ben, sorry, we were working out........ Sorry to hear of the troubles....hopefully it doesn't happen to you again or I am able to answer the phone and come to your aid.
On a side note, are the brackets going to work out for you??
TECH Apprentice
iTrader: (16)
Join Date: Feb 2008
Location: Fort Wayne, IN
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Excellent, I was hoping I didn't screw up the filming of you and the Evo to bad. Maybe Drew or been could chime in and give you a few pointers.
LS1TECH Sponsor
iTrader: (13)
Join Date: Mar 2005
Location: Indiana
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
I use Adobe Premiere Pro, a little complex but a good prog.
edit: here they are
http://www.youtube.com/watch?v=QLaKhbZ54IQ 25 roll evo edges him out, c6 didnt downshift right away
http://www.youtube.com/watch?v=JGI8qJs3Z2E 25 roll C6 wins
http://www.youtube.com/watch?v=0dsnnATZXUs 40 roll cobra wins
http://www.youtube.com/watch?v=i_ort2X2mc8 25 roll evo with the hit, cobra in first spins badly
Go easy on my awesome editing skills, first movies ive made
Last edited by 03cobra545; 05-03-2009 at 10:37 PM.
TECH Addict
iTrader: (17)
11 Second Club
iTrader: (34)
Join Date: Feb 2005
Location: Ft. Wayne, Indiana
Posts: 3,158
Likes: 0
Received 0 Likes
on
0 Posts
I think i got it figured out, im uploading them on youtube now, ill have the links up in a minute...
edit: here they are
http://www.youtube.com/watch?v=QLaKhbZ54IQ 25 roll evo edges him out, c6 didnt downshift right away
http://www.youtube.com/watch?v=JGI8qJs3Z2E 25 roll C6 wins
http://www.youtube.com/watch?v=0dsnnATZXUs 40 roll cobra wins
http://www.youtube.com/watch?v=i_ort2X2mc8 25 roll evo with the hit, cobra in first spins badly
Go easy on my awesome editing skills, first movies ive made
edit: here they are
http://www.youtube.com/watch?v=QLaKhbZ54IQ 25 roll evo edges him out, c6 didnt downshift right away
http://www.youtube.com/watch?v=JGI8qJs3Z2E 25 roll C6 wins
http://www.youtube.com/watch?v=0dsnnATZXUs 40 roll cobra wins
http://www.youtube.com/watch?v=i_ort2X2mc8 25 roll evo with the hit, cobra in first spins badly
Go easy on my awesome editing skills, first movies ive made